589,388 active members*
7,685 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Controller & Computer Solutions > Osai series 10 controller write protection on 2 partion disks on normal mode.
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2021
    Posts
    6

    Osai series 10 controller write protection on 2 partion disks on normal mode.

    Willing to pay anyone me that can help us fix it
    We have a cnc mill with osai series 10 controller ver5.1 .
    There is one Hdd that have 4 partitions.
    Our problem is that on normal boot partition E and F are write protected.C D and A are not write protected. Also L: which is network driver (netbue is write protected too). I have check and all attires on files seems fine.
    On emergency boot (pressing F1) all 4 partition are working without write protection
    We have all passwords for all level for security. tried all of the different level and nothing is working .
    Our TCP is not working correctly because of this
    Also we this is slowing down since we can not upload files to the cnc or edit gcode without turning the cnc off and on again
    Anyone can help us with this issue? Willing to pay for info.

  2. #2
    Join Date
    May 2024
    Posts
    22

    Re: Osai series 10 controller write protection on 2 partion disks on normal mode.

    t sounds like your issue with write protection on certain partitions and network drives during normal boot could be related to permissions or security settings configured within the OSAI Series 10 controller's operating system. Emergency boot bypassing the issue suggests a potential software configuration issue rather than hardware failure.

  3. #3
    Join Date
    Feb 2021
    Posts
    6

    Re: Osai series 10 controller write protection on 2 partion disks on normal mode.

    I have all securoy level passwords up to 0 level. I have tried them and the write protection on partition e: and F is still there.

  4. #4
    Join Date
    Feb 2021
    Posts
    6

    Re: Osai series 10 controller write protection on 2 partion disks on normal mode.

    can anyone help? Any professionals that can give me any remote support? Tried osai and osai_uk but they can not help me unless is send them the complete controller.
    Really need this solved

Similar Threads

  1. Osai 10/510 bad disks
    By Code7 in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 01-29-2024, 10:13 AM
  2. Newbie . Help needed on Osai series 10 controller.Willing to pay
    By The_dog in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 02-19-2021, 12:31 PM
  3. Newbie - communicating with old OSAI Series 10 controller units
    By GeometryShop in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 01-18-2017, 10:33 PM
  4. Read Write Protection
    By scurr in forum SIEMENS -> GENERAL
    Replies: 3
    Last Post: 06-02-2016, 10:52 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •