504,049 active members
4,135 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > CutLeader > postprocessor for laser machine with cypcut control
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Sep 2011
    Posts
    96

    postprocessor for laser machine with cypcut control

    Cypcut is widely used as laser control/software similar than the start control for plasma machine.

    The software works with the control (online cam software) is convenient for small size order. Some of machine owner likes to have offline programming in order to get more efficient running.

    The cypcut accepts NC file (G-Code) but the laser technical info in the NC code would be lost, because cypcut would convert the NC file to CAD drawing and assign cam feature to the geometry again.

    The file format saved by cypcut is in extension *.lxd, which is a file in XML style. We cost much time to investigate the content of the lxd file, and developed a postprocessor for it successfully. In this way, the cutting layer/leadinout/marking/ info did in CutLeader could be pass to cypcut without losing of cam information.


    [ATTACH=CONFIG]421040[/ATTACH]
    Attached Thumbnails Attached Thumbnails 11.png  

  2. #2
    Registered
    Join Date
    Sep 2011
    Posts
    96

    Re: postprocessor for laser machine with cypcut control

    We made a software to convert multiple dxf layout files to LXD file, then user could run the cutting in more efficiently, with less machine stop time.

    [ATTACH=CONFIG]423780[/ATTACH]

    [ATTACH=CONFIG]423782[/ATTACH]
    Attached Thumbnails Attached Thumbnails 2.jpg  

Similar Threads

  1. postprocessor for START/ FANGLING control
    By cutleader in forum CutLeader
    Replies: 0
    Last Post: 04-06-2019, 03:23 AM
  2. Where can I buy laser power control board for 40w MoshiDraw laser machine
    By azit in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 09-02-2016, 09:48 PM
  3. Replies: 0
    Last Post: 01-15-2016, 08:38 AM
  4. 18How to control the laser machine from the software
    By thunderlaser in forum LaserGRAV
    Replies: 0
    Last Post: 12-11-2013, 09:21 AM
  5. Lathe Postprocessor for Siemens Control
    By mecheng10 in forum SprutCAM
    Replies: 0
    Last Post: 11-10-2012, 05:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •