[deadlykitten]

thank you wizard for you calm and all

from today i will start using this when changing tools :

cutting1
G00 X... Z... M203 ( safe position, identical for other tools )
<T... M66> <G97/G96 S... ><move to operation M63>
cutting2

M65 i got it, but i won't used it ... maybe only to make a call to Australia
M61 will follow G96 kindly !

[broby]

thank you wizard for you calm and all

from today i will start using this when changing tools :

cutting1
G00 X... Z... M203 ( safe position, identical for other tools )
<T... M66> <G97/G96 S... ><move to operation M63>
cutting2

M65 i got it, but i won't used it ... maybe only to make a call to Australia
M61 will follow G96 kindly !

Don't forget DeadlyKitten, that you have largely hijacked this thread and I was trying to get the message through that the codes I was using was for the original machine stated... NOT yours, which is clearly a much later machine.
M203 does not exist on the earlier machines.
Good luck and stay safe.
Regards
Brian.

[deadlykitten]

maybe i just dropped in uninvited wedding crasher !

i am still thinking what to do with the time that will be spared after this thread experience ...

[broby]

maybe i just dropped in uninvited wedding crasher !

i am still thinking what to do with the time that will be spared after this thread experience ...

Yes well, some wedding crashers are welcome
After a short time, adding in cycle time reduction just becomes second nature.
I know that I got to the stage where I would create a program in IGF and modify the program straight away, if there was a decent quantity of course, not really worth it if only doing a few parts.
You now have heaps of time to do other interesting things.
Cheers
Brian.