[neroseu]

Can anyone tell me how can I make programs for FANUC 21i-TB on Daewoo PUMA400 ? I saw some small programs with .ths extension looking like:

( RAZA DE RACORDARE A CANALULUI CU DIAMETRUL EXTERIOR AL PIESEI CATRE FATA 2)#528=2.
( DIAMETRUL GAURII: DIA 50 SAU DIA 75)#519=75
( RAZA PASTILEI CE EXECUTA CANALUL EXTERIOR LA FATA 2 )#525=4
( FATA --- FATA1 = 1 , FATA 2 = 2 )#524=2
(************************************************* )
( --- ATENTIE, NU SE RENUMEROTEAZA --- )
G54
N10G50S2000
N15G0G40X300.Z300.
( CONDITIE INDISPESABILA DE DIAMTRU SHAMFREN FATZA 1)
N16IF[#503LT#507]GOTO9990
( CONDITIE INDISPESABILA DE DIAMTRU SHAMFREN FATZA 2)
N17IF[#503LT#508]GOTO9990
#500=0.5
#501=0.5
N18IF[[#504-4]GT#503]GOTO20
#504=#504+4
N19IF[[#504-4]LT#503]GOTO9990
N20IF[#524EQ2]GOTO760

can you help me telling me the software used for this ? I heard that this FANUC cand be programed in two ways

[Dan Fritz]

This program has both conventional G-code programming commands and "user macro" statements in the Fanuc "Macro-B" language.

There are many books and courses available for conventional G-code programming, but the Fanuc Macro language requires some special training. I suggest that you look at this website, where you can find training and reference materials on both programming methods: www.cncci.com

[TURNING MAD]

Where Are You Located? I Have Trained Many People On This And Similar Controls Using Offline,conversational,g-code And Macro Programming Techniqes. I Am In The Houston Area If You Are Interested In Special In-house Trainning

[neroseu]

well i'love to learn from you...but i am in romania and i have to learn by myself

[neroseu]

Where Are You Located? I Have Trained Many People On This And Similar Controls Using Offline,conversational,g-code And Macro Programming Techniqes. I Am In The Houston Area If You Are Interested In Special In-house Trainning

can you tell me what should i use, so i can start...i would appreciate very much and thank a lot

[TURNING MAD]

IF YOU ARE DOING BASIC TURNING, SUCH AS FACING,TURNING,DRILLING,BORING,THREADING, YOU MAY BE INTERESTED IN FANUCS NEW VERSION OF MANUAL GUIDE i. AFTER ALOT OF PRACTICE YOU CAN WHIP OUT PART PROGRAMS RATHER QUICKLY. THIS WILL ALSO FAMILIARIZE YOU WITH BASIC G-CODE STRUCTURE.

[Bluesman]

can you tell me what should i use, so i can start...i would appreciate very much and thank a lot

This should get you started, It is a beginer guide for Macro B programming, Along with a list of varibles both comon and system. Give me a shout if you need any help

Bluesman

[kyda3i]

Who have manual books of Fanuc 21i TB can give me?
my email: [email protected]
goodluck every body
Thanks you very much!

[gtrrpa]

Does anyone know the M code for tailstock Advance and return. using the control on a Takasawi 308.................Thanks

[f-bu]

if it is Takisawa, try M10, M11

[Ibanezrg7620]

I would like to ask anyone if you can share the Fanuc 21i TB user manual.
My email: [email protected]
Thank you very much in advance!

[ernjorge]

I would like to ask anyone if you can share the Fanuc 21i TB user manual.
My email: [email protected]
Thank you very much in advance!

I'm needing the same. Anyone that could help, please send it to [email protected]
Thanks a lot!