I have a dome shaped surface that a want to project lettering to. I post the toolpath as an .nci file and project it to the surface. The lettering is the shape of the surface but is above it. We were very tempted to start playing with our z values but thought better about it. We are using v9. Please help!
Results 1 to 3 of 3
-
12-01-2006, 09:47 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 28
Projecting lettering to a surface
-
12-01-2006, 10:27 PM #2
Registered
- Join Date
- Oct 2006
- Posts
- 18
I would be happy to look at it [email protected] if you do send it to me, dont zip the file.
-
12-03-2006, 08:11 PM #3
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Do a surface finish project and use the option of curves pick the curves.
Here is a sample(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With Quote
Posting Permissions
