[8BitMetal]

Hey,

I was wondering if a CNC laser can cut lines in to a piece of metal without any specific width of the line, I just want the thickness of the laser for the width. I will attach a couple files so show what I mean.

So for example in the jpg I want a couple lines on the inside of the parameter to not have any specific width, I just want the laser to start at 1 point and follow along to the next. Is this possible? Like the box outside the circles or the lines on the outer edges. Also the lines that cut in to the bump on the top but not all the way across, will the laser be able to do this too? Sorry if the wording is jumbled and confusing, but hopefully you pick up the gist of what I am asking. Thanks in advance!

Kirk

[jakson]

The Laser capabilities provide different lengths of pulses. Basically a Laser produces 170 fs pulses at a central wavelength of 1057 NM and the pulses can be amplified up to 190 J in an f/40 target chamber, limited by the damage thresh hold of the laser system.



Thanking you..
Tarpomatic.net