603,979 active members*
1,382 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > re post processor v21 mach 3
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2007
    Posts
    341

    Red face re post processor v21 mach 3

    does any one know what the mach 3 processor operates in say ij mode incremental or absolute . my problem is that when cutting pockets it flats the corners instead of a radius even though i have defined a radius in the software under pockets.I thought it may be a general config setting that needs to be changed in mach 3 ? And as for tech support called three days ago and again yesterday no resonse is it not wonderfull service.

  2. #2
    Join Date
    Dec 2005
    Posts
    121
    In V21 on the cam side of the software goto SETUP then DRIVER , then click on the ISO tab, there you will see the differrent arc types if incrementeal I and J is checked then it would be incremental I and J , if nothing is checked then it would be absolute I and J .

  3. #3
    Join Date
    Dec 2007
    Posts
    341

    Talking thanks

    thanks thats what i needed

Similar Threads

  1. post processor for mach 3?
    By njitnjau in forum EdgeCam
    Replies: 15
    Last Post: 09-26-2019, 04:28 AM
  2. MasterCam X2 For Mach 3 Post Processor
    By kingpav in forum Post Processors for MC
    Replies: 1
    Last Post: 06-02-2008, 10:01 AM
  3. VM 3.0 Post Processor for Mach 3 OR 2
    By TCSpooner in forum Visual Mill
    Replies: 4
    Last Post: 12-28-2007, 03:55 AM
  4. Mach post processor for Artcam
    By mikie in forum Mach Software (ArtSoft software)
    Replies: 6
    Last Post: 11-15-2005, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •