[coco.han]

I have a chinese machine (superstar CNC 6090) and was away for 10 days, then when I try to run it, the Z axis movement was very noisy, then stopped
and controller with weird coordinates, (home position unchangeble and something like 10 meters(-).
controller is rznc-d5416/32/3/L1/4.111 (zhb275), is anyone who had a problem with that type of controller, and what to do, where to buy anotherone if nothing is to do?

[cornfused]

I have a chinese machine (superstar CNC 6090) and was away for 10 days, then when I try to run it, the Z axis movement was very noisy, then stopped
and controller with weird coordinates, (home position unchangeble and something like 10 meters(-).
controller is rznc-d5416/32/3/L1/4.111 (zhb275), is anyone who had a problem with that type of controller, and what to do, where to buy anotherone if nothing is to do?

I have a RZNC-D5416/32M/3/L1-4.111 (zhb188) 1638 DSP with breakout board. $150.00 USD It is in very good condition. I replaced this with a Mach3 system soon after I bought my 6090 CNC Router.

[email protected]

Thank you,
Perry

[studiotuzi]

I think that you have to config the "pulse"