[ehab]

Dear all,
Any one can help post a sample Nisshinbo g-code program that has some cycles in it.
Thanks in advance.
Ed

[Independent CNC]

Here is one but I too need more. The "T" code is what I need some one to explain right now!

Greg
Home Page: http://www.ctcn.net/~3kings/index.html

O"ELW0008-01A" P"PLATE LATERAL SUPPORT" M"AL-HARD" X33.51Y48.0 T0.19 A8.0 B26.0 S1 K50
N001 G37 V5 W1
N002 G183 X1.0 Y3.5 I15.88 J6.25 H2 K7 V7W12D0
N003 G183 X1.0 Y3.5 I15.88 J6.25 H2 K8 V13W14D0
N004 G183 X1.0 Y3.5 I15.88 J6.25 H3 K7 V15W16D0
N005 G05 Y49.606 F80 T129
N006 G03
N007 G90
N008 G32
N009 G02 X0.5 Y0.75 T129 F80
N010 G02 X0.5 Y5.25 T129 F80
N011 G02 X15.13 Y5.25 T129 F80
N012 G02 X15.13 Y0.75 T129 F80
N013 G90
N014 G71 X1.51 Y-0.125 I2.522 A0.0 H6 T301 C0.0 F80 M1
N015 G90
N016 G71 X-0.125 Y1.51 I1.49 A90.0 H3 T301 C90.0 F80 M1
T129 F1 A0.25
T301 F4 A3.0 B0.25 G0.0
%

[vijayv]

Here is one but I too need more. The "T" code is what I need some one to explain right now!

Greg
Home Page: 404 - Page Not Found

O"ELW0008-01A" P"PLATE LATERAL SUPPORT" M"AL-HARD" X33.51Y48.0 T0.19 A8.0 B26.0 S1 K50
N001 G37 V5 W1
N002 G183 X1.0 Y3.5 I15.88 J6.25 H2 K7 V7W12D0
N003 G183 X1.0 Y3.5 I15.88 J6.25 H2 K8 V13W14D0
N004 G183 X1.0 Y3.5 I15.88 J6.25 H3 K7 V15W16D0
N005 G05 Y49.606 F80 T129
N006 G03
N007 G90
N008 G32
N009 G02 X0.5 Y0.75 T129 F80
N010 G02 X0.5 Y5.25 T129 F80
N011 G02 X15.13 Y5.25 T129 F80
N012 G02 X15.13 Y0.75 T129 F80
N013 G90
N014 G71 X1.51 Y-0.125 I2.522 A0.0 H6 T301 C0.0 F80 M1
N015 G90
N016 G71 X-0.125 Y1.51 I1.49 A90.0 H3 T301 C90.0 F80 M1
T129 F1 A0.25
T301 F4 A3.0 B0.25 G0.0
%

We need your help in running a nisshinbo Punch here in Jordan

We couldn't start the machine as the Machine controller software got erased

Can you help in setting the same.

Its Urgent.

[vijayv]

Dear all,
Any one can help post a sample Nisshinbo g-code program that has some cycles in it.
Thanks in advance.
Ed

We need your help in running a nisshinbo Punch here in Jordan

We couldn't start the machine as the Machine controller software got erased

Can you help in setting the same.

Its Urgent.