588,127 active members*
5,138 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > SCHAUBLIN 100 CNC vertical center error tool magazin
Results 1 to 5 of 5
  1. #1

    Question SCHAUBLIN 100 CNC vertical center error tool magazin

    Hello, I have a SCHAUBLIN 100 CNC vertical machining center. The problem is that the magazine with the tool is blocked.
    Control is FANUC 0i-MC. There is no error on the display, only the ATC light is on. The machine does not go to the reference points, the ATC alarm is constantly activated, it cannot be reset with the RESET button. I checked the limit switches on the tool magazine, they are correct, the magazine is in a good position. There are two inductive sensors for the tool position on the magazine spindle, both are activated. Does anyone have an idea where the error is.

  2. #2

    Re: SCHAUBLIN 100 CNC vertical center error tool magazin

    Solved, Due to a bad power supply, the 24v dc machine was losing the order of the tools.
    Fixed power supply and reinserted tool parameters.
    It works now

  3. #3

    Re: SCHAUBLIN 100 CNC vertical center error tool magazin

    hello,
    Now I have another problem on the same machine.
    When drilling a hole, the number of revolutions of the spindle decreases, there is no power.
    If I go with the drill 10 mm after the drill enters the material two to three millimeters, the spindle stops completely.
    The machine does not throw an error.
    I checked, there is no slipping on the belts.
    please help

  4. #4
    Join Date
    Dec 2015
    Posts
    174

    Re: SCHAUBLIN 100 CNC vertical center error tool magazin

    Could please help me regarding same machine backup files [email protected]

  5. #5

    Re: SCHAUBLIN 100 CNC vertical center error tool magazin

    Greeting,
    I didn't see the message, if you didn't decide to send it to you.

Similar Threads

  1. mazak VTC20B T plus error 212 magazin
    By wojtekthx in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 03-04-2020, 09:17 PM
  2. Replies: 3
    Last Post: 02-19-2020, 07:57 AM
  3. SCHAUBLIN 43 CNC automatic tool changer Problem
    By heeerekarjp in forum Fanuc
    Replies: 3
    Last Post: 06-14-2015, 08:03 AM
  4. stock Vertical Turning Center, CNC Vertical Lathes, SMTCL VTC6070
    By SMTCL Europe in forum News Announcements
    Replies: 0
    Last Post: 05-09-2011, 12:57 PM
  5. CNC Vertical machining center
    By soumen in forum Mori Seiki lathes
    Replies: 0
    Last Post: 03-11-2008, 03:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •