[holic46]

Thank you bobsch, changing the units did the trick. however I have a new problem; my motors are running in opposite direction to G command e.g. on Z1.00 command the tool is moving out of the stock and vise-versa. Result - two broken bits.
Any solution?

[cd_edwards]

Thank you bobsch, changing the units did the trick. however I have a new problem; my motors are running in opposite direction to G command e.g. on Z1.00 command the tool is moving out of the stock and vise-versa. Result - two broken bits.
Any solution?

This sounds about right. Z0 is at the top of the axis and negative movements should lower your Z axis. This is machine coordinates. Relative Coordinates move the same way however Z0 is now set for the top of the material usually. There is an option in some software to have Z0 set for your tabletop. I don't think it's used often though.

[Sikkone customs]

need files in dxf . thanks

[Sikkone customs]

need help cleaning up for laser etching. There are lines on top of line . thanks

[Sikkone customs]

here is the file that needs cleaning up. thanks

[Dawgonhawg]

Would anyone have a peacock with the tail spread to share? Will be cutting with plasma.
Thanks, Dawg

[Dawgonhawg]

Klaug, her name is Madeline.

[DJNPHOTO]

here you go i got this from this post

[Mac Morvant]

Can some one give me an example on how to convert DXF to GCODE File ,to use with MACH3??????? THANKS for any help

[djt]

Hello gentlemen,
I ask you to transfer the image to dxf format.
Thank you very for your help

Yours
Tomino

[jalessi]

Hello gentlemen,
I ask you to transfer the image to dxf format.
Thank you very for your help

Yours
Tomino

Tomino,



Hope this helps,

Jeff...

[djt]

Thank you,
You really helped me Jeff...

Regards
Tomnio
:banana:

[ryke]

Would someone like to change this to a dxf? Really just needing the corn stocks letters i can edit, but what ever works thanks in advance

[Traceman]

Try this.

Thanks Bob!!

[jalessi]

Would someone like to change this to a dxf? Really just needing the corn stocks letters i can edit, but what ever works thanks in advance

A little corn for your project,

Jeff...

[HorridHenry]

When I load this into MastercamX6 it has a black background and very faint red lines.

Its a DXF of an unfinished train I was messing about with in Artcam,I traced it(not very good) and the selected the vectors and exported as a DXF but before I exported it was black vectors on white background whats gone wrong?

[HorridHenry]

When I load this into MastercamX6 it has a black background and very faint red lines.

Its a DXF of an unfinished train I was messing about with in Artcam,I traced it(not very good) and the selected the vectors and exported as a DXF but before I exported it was black vectors on white background whats gone wrong?

[HorridHenry]

oops! its too big to upload,will have to try and size it?

Zipped it....

[Larry83301]

When I load this into MastercamX6 it has a black background and very faint red lines.

Its a DXF of an unfinished train I was messing about with in Artcam,I traced it(not very good) and the selected the vectors and exported as a DXF but before I exported it was black vectors on white background whats gone wrong?

Opens OK is MasterCam X2

Larry

[sqatch]

Try this for vinyl or plasmaAttachment 156996