[maly-miller]

I want to try the aspire 4.0 from vectric to do some wrapping jobs and I don't want to waist my trial period in figuring out the following:

For Sherline CNC Mill with 4th axis placed on the x-axis base, in other words the stock material will be parallel to x-axis. for this setup, am I wrapping the x values on the y axis or wrapping the y values on x axis?

[ger21]

I can't answer your question, but the trial period is indefinite with Vectric products. The catch is that you can only create g-code for the provided samples.

[Fastest1]

I believe BobCad and CamBam both have wrapping features too.

[maly-miller]

I believe BobCad and CamBam both have wrapping features too.

They are out of my budget currently, specially bobcad. I am just a hobbyist

[maly-miller]

I can't answer your question, but the trial period is indefinite with Vectric products. The catch is that you can only create g-code for the provided samples.

Well thanks for your answer. I guess i will try both and see what will come out hope not to ruin my machine

[ger21]

They are out of my budget currently, specially bobcad. I am just a hobbyist

CamBam = $150
Aspire = $2000
?????

[maly-miller]

CamBam = $150
Aspire = $2000
?????

I meant for Bobcad. I will try cambam i didn't know about it till you mentioned it now. I thought it is a bobcad product too. Thanks for the reply.