[adt2]

Seems like I've read that the motors can be jogged while in the Motor Tuning screen to ease the velocity and acceleration adjustments. However, I spent some time last night monkeying with my setup and I am unable to make the motors move while the motor tuning screen is open.

It's not a huge deal, just curious if I'm doing something wrong.

[ger21]

Up and Down arrow keys.

[adt2]

Doesn't work. None of my arrow keys do anything until I close the Motor Tuning window.

[ger21]

Try Page Up and Page Down?

[adt2]

Tried all four arrow keys and PageUp/PageDn. No dice.

Could it be because I've remapped the jog keys? They're still on the arrow keys, but I changed the X & Y axes to match the orientation of my machine. Wonder if Mach doesn't look for re-mapped keys when the window's open?

[amishx64]

I can't either. I always end up opening an closing the Motor Tuning window a few hundred times before everything is done.

I know it works in EMC2 though...

[ger21]

Not really sure, but I know it does work on mine.

[Markwind]

That's a strange one for me too, sometimes it works and sometimes it does not, I have often wondered why?

if anyone has some insite on this I would be very interested in knowing, becuase it's really nice when it works

[small_toys]

Mine does not work either and I have Mach's standard key mapping for the mill. This would have helped out a lot while tuning this past weekend.