[Mondodave]

I'm having an issue with the drawbar on my machine and am trying to find out how to remove it from the spindle. I believe some f the bellville washers are broken because the drawbar is too far down for the pancake cylinder to make contact with it. If anyone out there can give me some pointers on how to remove it, it would be greatly appreciated. The manuals I have don't have anything on how to remove it.

[Brian L]

I have this info:



I found another document, not sure if I can attach a pdf, will try.... had to do a link to my drop box

https://www.dropbox.com/scl/fi/x138a...=159e46n6&dl=0

[Mondodave]

Thanks Brian, this is exactly what I needed.

[Brian L]

You can get the Bellevilles from:

https://www.mwcomponents.com/belleville-washers

You will have to do some research with a cross reference to find the right number... but they are a lot cheaper than ordering from Milltronics.