Hi all,
I have a Techno HDS 60120 with OSAI controller, becker vaccum pump and automatic tool changer. I work in a cabinet shop making custom kitchens. We have been making shaker style doors on the cnc but it is a constant battle to get good results. I have watched all the youtube videos, read thru all the forums here, reddit, and facebook and I still cannot figure anything out to make these cuts better. Ideally my boss wants them to come off the cnc "perfect" so that they can be sent right into the paint booth, and not be sanded at all. This cut pictured is what I get when I use the toolstoday cut file and recommended bit set (https://toolstoday.com/free-mdf-simu...tomizable.html).
Why am I getting so many lines through my cut and why when I switch bits it is not cutting at the same depth. I was told that everything should be coming out smooth and "perfect" since I have an automatic tool changer and I'm not resetting the z between bits. Any insight to what I am doing wrong, or what is possibly wrong with my cnc would be greatly appreciated.