603,777 active members*
4,050 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Auto Tool Changer > Supermax rebel 1 tool change not completing
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2022
    Posts
    32

    Supermax rebel 1 tool change not completing

    I just got a mid 90s Supermax with Fanuc 0m controller. It was doing tool changes in a program and mdi, but now it is stopping after the carousel comes into the spindle to grab the tool. I checked the limit switch and it ohms out. Its not giving an alarm but don’t know how long it would take to throw.

  2. #2
    Join Date
    Nov 2022
    Posts
    32

    Re: Supermax rebel 1 tool change not completing

    i have also been trying a tool change every day or so, sometimes i can get it to change, then 5 minutes later it will stall after the carousel moves forward to grab the tool. when it does this i do not hear the tool unclamp. i tried it using the manual tool change sequence and i could move the carousel forward, unclamp the tool, but when pushing the mag down buttton it wouldnt move.

Similar Threads

  1. Replies: 0
    Last Post: 08-24-2017, 03:58 PM
  2. Any one have or run a Supermax Rebel 1?
    By DennisCNC in forum Uncategorised MetalWorking Machines
    Replies: 7
    Last Post: 10-21-2015, 04:46 PM
  3. SUPERMAX REBEL
    By gabedrummin in forum Fanuc
    Replies: 2
    Last Post: 07-01-2015, 08:53 PM
  4. Supermax Rebel 1
    By Micwanho in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 01-27-2011, 06:55 AM
  5. takisawa not completing tool change
    By premacpmc in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 09-02-2009, 04:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •