Hello,
I have an Hurco tmm8 from 2005 with winmax v02 Lt. I already tried the post from fusion but I get errors at every G,M). I tried to find the post for Fanuc 0M that I read somewhere that will work but no result in find it for fusion. If somebody have an post that works ok please help me, I'm really desperate and exhausted.
Thanks!
Thread: Hurco Tmm8 post
Results 1 to 7 of 7
-
05-30-2025, 08:04 PM #1
- Join Date
- May 2025
- Posts
- 5
Hurco Tmm8 post
-
06-11-2025, 10:55 AM #2
- Join Date
- Jun 2025
- Posts
- 3
Re: Hurco Tmm8 post
Hello Claudio,
If you don't find anyone with this post processor, I can help you to write new one.
-
06-24-2025, 08:51 PM #3
- Join Date
- May 2025
- Posts
- 5
How?
Originally Posted by cncprogramming
-
06-30-2025, 07:33 PM #4
- Join Date
- Jun 2025
- Posts
- 3
Re: Hurco Tmm8 post
Do you have a programming manual and list of M/G codes? Send it over and I'll send you a quote to customize post processor for your machine.
-
07-02-2025, 08:57 PM #5
- Join Date
- May 2025
- Posts
- 5
Re: Hurco Tmm8 post
G codes an and an example .
- - - Updated - - -
.
-
07-03-2025, 08:46 PM #6
- Join Date
- Jun 2025
- Posts
- 3
Re: Hurco Tmm8 post
Does machine support both BNC and ISNC programming?
-
Yesterday, 03:26 PM #7
- Join Date
- May 2025
- Posts
- 5
Re: Hurco Tmm8 post
BNC only...if it was ISNC... Originally Posted by cncprogramming
Reply With QuoteSimilar Threads
-
Hurco lathe TMM8 crashes and failed to orient the life tool
By arsanius in forum HURCOReplies: 0Last Post: 01-01-2015, 09:15 PM -
Hurco lathe TMM8 crashes and failed to orient the life tool
By arsanius in forum Colchester Tornado lathesReplies: 0Last Post: 01-01-2015, 09:00 PM -
hurco lathe TMM8
By ionut in forum HURCOReplies: 0Last Post: 02-04-2014, 04:57 PM -
TMM8
By phil1978 in forum HURCOReplies: 1Last Post: 07-19-2008, 05:07 PM -
NEWBIE HURCO TMM8 OPERATOR
By phil1978 in forum HURCOReplies: 3Last Post: 06-25-2008, 12:26 PM
Tags for this Thread
Posting Permissions
