I'm waiting on manuals to arrive for an Enshu D&T Center just purchased but am anxious. It's an OM-Mate control. I have a few machines already with OM's but can't seem to figure out the homing procedure at startup for this Enshu. I'm used to using the Mechanical dial function select and homing "switches" but this has nothing but soft buttons. I figure there must be a sequence of what buttons to push or what buttons simultaneously or something because I can get it to jog around after initialization but can't seem to send axes in motion for initial homing using what appears to be the Homing buttons . Hopefully an Enshu DT owner can shed some light so I won't have to wait the week for the manuals. Thanks!