587,591 active members*
4,528 visitors online*
Register for free
Login

Thread: Testing Re-Wired Stepper Motors

Results 1 to 1 of 1

Threaded View

  1. 12-29-2023, 08:06 PM #1
    kolias
    kolias is offline Member
    Join Date
    May 2009
    Posts
    1342

    Testing Re-Wired Stepper Motors

    I'm relocating the control panel in my tabletop cnc and I have to add about 4 feet of four conductors cable to each stepper motor (4 motors + VFD Spindle). Its easier to cut the cable outside the control panel and solder the ends. After I finish each cable and before I apply power is there any test I can do to assure all work is good? I attach the driver of each motor for information.

    Thanks
    Attached Thumbnails Attached Thumbnails Stepper_Driver.jpg  
    Nicolas
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3
    By automationtechinc in forum Automation Technology Products
    Replies: 0
    Last Post: 06-10-2021, 04:42 PM
  2. Help Bench Testing Stepper Motors
    By janz99 in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 12-05-2016, 04:06 AM
  3. Testing stepper motors
    By monkeypuzzle in forum Stepper Motors / Drives
    Replies: 6
    Last Post: 07-26-2015, 10:38 AM
  4. 10 wired stepper
    By smoregrava in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 10-17-2005, 01:40 PM
  5. testing bipolar stepper motors from ebay
    By cowanrg in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 07-14-2005, 07:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules