Hi!!!
i'm new to cnc diy.
i buy a 4 axis chinesse cnc driver controller from ebay, and i have 3 vexta stepper motors, works fine with mach 3 and lazy cam, but only make 2d objects.
Mach 3 is capable of doing 3d objects????
Can i use this ebay driver with other cad/cam softwares such as visualmill,badcad?????
Results 1 to 2 of 2
-
12-09-2010, 04:11 PM #1
Registered
- Join Date
- Dec 2010
- Posts
- 0
mach3 driver controller could work with other cad/cam softwares
-
12-09-2010, 05:40 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35494
Yes. you can use any CAD/CAM that can generate g-code for Mach3.Mach 3 is capable of doing 3d objects????Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
anilam to Mach3 Driver help
By Raden in forum Servo Motors / DrivesReplies: 3Last Post: 02-16-2011, 07:06 PM -
Controller works with Mach3 but on EMC2 it wont work but other mill does so ?
By Tkamsker in forum LinuxCNC (formerly EMC2)Replies: 14Last Post: 10-26-2010, 05:00 PM -
Built a simple step controller with a PC glitch? (now cannot get Mach3 to work)
By mrgadgeteer in forum Controller & Computer SolutionsReplies: 2Last Post: 01-30-2010, 12:21 AM -
Would this driver work with my motor?
By eScott in forum Stepper Motors / DrivesReplies: 0Last Post: 05-15-2009, 07:13 PM -
Feedback from Driver, how does Mach3 know where it is?
By Darc in forum Mach Software (ArtSoft software)Replies: 3Last Post: 04-14-2006, 07:13 AM
Posting Permissions
