603,794 active members*
3,258 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 0M-B spindle orintation parameter

Thread: Fanuc 0M-B spindle orintation parameter

Results 1 to 4 of 4
  1. 03-03-2011, 11:02 PM #1
    vlado
    vlado is offline Registered
    Join Date
    Jun 2006
    Posts
    7

    Fanuc 0M-B spindle orintation parameter

    I have a V.Center with Fanuc 0M-B control. I will replace additional pulscoder on spindle.
    Is there parameter for "orientation stop position shift amount" ?
    Reply With Quote Reply With Quote
  2. 03-03-2011, 11:41 PM #2
    cncserveng
    cncserveng is offline Registered
    Join Date
    Nov 2010
    Posts
    0
    This might help (not shouting, just copied text)

    SPINDLE ORIENT POSITION SETTING.

    THE KEY MUST BE CENTERED TO TOOL CHANGE ARM WHEN THE ARM IS AT THE ENGAGE POSITION, LOOK UNDER SPINDLE.
    ANY ERRORS MUST BE ADJUSTED BY CHANGING THE VALUE IN PARAMETER 6531 (4096 = 360 deg.) i.e. 1deg = 11.38 approx.
    Reply With Quote Reply With Quote
  3. 03-04-2011, 02:45 AM #3
    stevo1
    stevo1 is offline Gold Member
    Join Date
    Jun 2008
    Posts
    1511
    Quote Originally Posted by cncserveng View Post
    This might help (not shouting, just copied text)
    I think you just felt like shouting. I already did tonight on my way home from work in the car. Makes you feel much better.

    Stevo
    Reply With Quote Reply With Quote
  4. 03-04-2011, 06:21 AM #4
    vlado
    vlado is offline Registered
    Join Date
    Jun 2006
    Posts
    7
    Fanuc 0M-D control used parameter 6531.
    I have Fanuc 0M-B control.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Spindle Orintation Problem
    By Greg 24 in forum Haas Mills
    Replies: 10
    Last Post: 10-01-2009, 05:26 PM
  2. fanuc OM-D spindle orientation parameter?
    By meadowtech in forum Fanuc
    Replies: 2
    Last Post: 02-09-2009, 06:15 PM
  3. Need parameter for the spindle RPM.
    By g-codeguy in forum Fanuc
    Replies: 2
    Last Post: 09-29-2008, 01:40 PM
  4. How to setting fanuc serial spindle parameter?
    By ning in forum Fanuc
    Replies: 1
    Last Post: 10-30-2005, 09:38 PM
  5. spindle orintation fanuc 21iT
    By fjd in forum Fanuc
    Replies: 1
    Last Post: 03-10-2005, 01:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules