[jkujawa]

Hello,

I need 6-8 pieces machined from Bronze. The specific alloy is not too critical as these are just prototype parts. I will send files to interested/qualified responses directly. Here are some key 'high level' parameters:

• overall part envelope is 4" diameter x 1.2" high
• it will likely be a turning operation, followed by some surfacing on one side by a CNC
• This is NOT a job that (I believe) can be tackled by manual programming - it will require some CAM-generated programming (because of the complex surfaces)
• We need parts in about 7 days
• We can provide the material if necessary

Please let me know if you have the required capabilities, where you are located, etc and I can provide the files for quote.

Thanks!
John
[email protected]

[dstryr]

email sent

www.creationsultd.com