603,979 active members*
3,569 visitors online*
Register for free
Login

Thread: configure run button

Results 1 to 2 of 2
  1. 05-25-2006, 03:30 PM #1
    xtihc
    xtihc is offline Registered
    Join Date
    Jan 2006
    Posts
    8

    configure run button

    hello everybody
    Can we configure a parallel port input pin to run button?

    thank you!
    Reply With Quote Reply With Quote
  2. 05-25-2006, 10:57 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35494
    Yes. You set up the input as an OEM trigger with the appropriate code. YOU CAN FInd the info in the manual or the customization Wiki at www.machsupport.com
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules