I have a Legacy router mill and I'm in the process of purchasing the CNC upgrade being supplied by DynaCNC. I have no prior CNC experience but I am comfortable working with programs and have some programming experience ( not with Mach 3 though). The system will be 4/5 axis; X,Y,Z, and the spindle holding the stock with motors and the bed is adjustable manually.
I have spoken with Dyna and they don't seem to have any manuals or tutorials available except the basic setup information.
Are there any books available for Mach 3? To start with I'm interested in producing long tapered shafts and I'm looking for guidance with the code. Any samples would be helpful or direction where where I can get programming info will be helpful.
Thanks
Thread: Legacy Mill with DynaCNC upgrade
Results 1 to 2 of 2
-
01-10-2008, 06:08 PM #1
Registered
- Join Date
- Jan 2008
- Posts
- 1
Legacy Mill with DynaCNC upgrade
-
01-11-2008, 04:25 AM #2
Gold Member
- Join Date
- Nov 2007
- Posts
- 2466
go to machs forum
at artsoft.com
Reply With QuoteSimilar Threads
-
Legacy DOS program capability preservation
By NC Cams in forum CNC (Mill / Lathe) Control Software (NC)Replies: 56Last Post: 12-18-2006, 03:18 PM -
Fadal legacy (88-HS) troubles
By Andrew_K in forum FadalReplies: 7Last Post: 12-12-2005, 12:50 AM -
IH mill motor upgrade
By Randall in forum Charter Oak Automation Support ForumReplies: 13Last Post: 11-14-2005, 09:04 PM -
Dash 3 Legacy software issue
By ZachB in forum FadalReplies: 0Last Post: 09-15-2005, 08:36 AM -
Ballscrew upgrade for Taig Mill?????
By Philip in forum Taig Mills / LathesReplies: 1Last Post: 12-01-2004, 05:08 PM
Posting Permissions
