[Big_Lunn]

Hey guys, the time situation is pretty tough.I really dont have much of it and would rather try picking up an already built machine. Is there anyone in the area selling one??? Please let me know.

[russeller]

Indianapolis isn't exactly in the area but I will be selling one. Pick-up only.
email [email protected] if your interested.

[dblais]

I have a SMT CNC Lathe. The machine was retrofitted with a General Numerics control about the mid-80s'. The machine can be had for the Rigging cost to remove it. It also has an Extra Turret. We bought the machine new around 1979.

[Anubisbot]

What are u looking for exactly? Router Mill Wire cutter ??

And what size of work envelope?

Best regards
Oliver

[easyprototype]

I have a friend here in Sherbrooke, Québec, who sells homemade CNC routers. The machines are intended for RC (plane) modelists and are very affordable. You can cut wood (slowly) and soft material with them. They use a dremel as a rotary tool. The work area is about 14 inches x 36 inches I think. The resolution of the machine is good enough for RC plane parts.

If this is what you are looking for, just say so or send me a PM and I will give you his EMail address

[wiegems]

Hi I have one for sale , in waterloo can call if interested for details at 519-342-0824

[fatal-exception]

I'm in Saskatoon and have an X2 mini mill with gecko drives and steppers, nook ball screws, belt drive, stand, and fully enclosed electronics cabinet for sale. It has very low running time on it.

Paul

[AlleyCat]

A friend of mine has a small one (19"x13" table) for sale, complete with a PC and licensed software. It has a Roto-Zip type spin saw for a spindle. He doesn't use it since he got one with a 5' x 12' table.
I am near London, Ontario. Shoot me a message if interested...

Al

[fatal-exception]

This raises the question...cnc what?

[Big_Lunn]

my apologiez, I'm looking for a cnc router with a cutting area of about 24"x48"x3-5".......

[Fixed_Gear]

How much are you looking to spend? What are you going to be doing with it?

[Fixed_Gear]

Well, did you find one?

[Big_Lunn]

nope im still looking. im planning to cut soft metal and wood to make molds.

[corrie]

how about this one

[Big_Lunn]

thats the one from kijiji, ive msg the person about that one already

[corrie]

Yes I know, that is my machine, I have recently rebuilt it myself. I should realy repost the add in the classifides here on the zone.

[corrie]

Anyone in the Toronto area looking for a machine,mine is up for sale,offers are welcome, reason for selling is i,m upgrading,cheers.

[GORILLA CNC]

www.gorillacnc.com

[loopy251]

I have a duel router / plasma table im thinking of selling its not home made though, it has a 52" x 52" footprint , 2 years old and looks like new , never had any problems with it but i have only done some light router and engraving work with it, if your interested e-mail me @ [email protected] and i'll send ya some pictures and more info .I live in Ontario, can

[Novakon]

Hi All,

We also carry CNC machines that may be of interest to you.

Please have a look at http://www.novakon.net/3.html

We are located in Toronto.

Please feel free to contact us should you have any questions.

Thank you.