[gbowne1]

I'm trying to set up the new 6T-B control parts I bought.

I'm having problems with the 6T-B input / power unit

A14B-0061-B103

If this unit is faulty, what problems would I have?

Does anyone know how this unit is wired into the input & power?

Are there fuses on this part?

Thanks,
Greg Bowne
Seattle, WA

[SINUMERIKO]

Please see if the attached file helps you, has the info for 2 input units used on the 6M but I think is pretty much the same as in the 6T.

[gbowne1]

Those were helpful diagrams. I also have a 6M-B control, but the new 6T-B control which have started to put together got confusing. Wish I had the connection diagram and any other related wiring diagrams.

I had a custom built VMC that needed a control, so I chose the 6M-B put together from ebay parts with help from FANUC parts lists and their tech support. Took about 6 months of collecting parts though. It was relatively easy to put together.

Aparently this input power monitors the 5v/24v supply.. and handles the 200v input.

My 6T for the custom lathe / turning center I have (similar to a Mori-Seiki SL type lathe) is a built in type. The 6M-B I have is in a free standing floor cabinet (The CRT/MDI and operator/keyboard panel came from a old CAT45 taper Monarch VMC that was scrapped).

Greg