Hi all!

I've been using gibbscam for sometime now, and working off various 3d models etc. Now one particular job ive been working on i really need to improve the cycle time, using very small cutters so cant go mad. But the feature "hit flats" on the roughing cycle needs to be ticked so i can get all the depths required from the model, as part has various levels and depths, but the difference between having this ticked and un ticked is about 20mins to my cycle.... i wonder if there is a easy solution to this situation of making "hit flats" or machine model to depth
alot quicker when using stepped passes.

Any feedback most is appreciated

dan