587,158 active members*
2,890 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge Collet, Tap Adapter and Drill Bushing Tray

Thread: Hardinge Collet, Tap Adapter and Drill Bushing Tray

Results 1 to 3 of 3
  1. 04-22-2010, 12:42 PM #1
    HelicopterJohn
    HelicopterJohn is offline Registered
    Join Date
    Dec 2005
    Posts
    769

    Hardinge Collet, Tap Adapter and Drill Bushing Tray

    Hi,

    I tried for some time to find a used collet tray for my Hardinge HC Chucker.

    It apprears that the usual configuration when shipped is only one tray while the cabinet was fitted with 2 brackets for trays.

    I decided to make my own. I programmed the parts utilizing ONECNC XR3. While I was in the design process I decided to make some holes for holding my Hardinge Tap Adapters and Hardinge Drill Bushings.

    Here is a few pictures for your amusement.
    Attached Thumbnails Attached Thumbnails IMG_0557a.jpg   IMG_0558a.jpg   IMG_0559a.jpg   IMG_0562a.jpg  

    IMG_0563a.jpg   IMG_0564a.jpg   IMG_0567a.jpg   IMG_0570ajpg.jpg  

    2007 HAAS TM-1P OneCNC XR5 Mill Pro. Shopbot PRT running Mach3 2010 Screen Set, Super PID and PMDX Electronics.Check out my Gallery on: http://[email protected]
    Reply With Quote Reply With Quote
  2. 04-22-2010, 02:18 PM #2
    JP Hardinge
    JP Hardinge is offline Registered
    Join Date
    Aug 2009
    Posts
    71
    Very cool.
    Reply With Quote Reply With Quote
  3. 04-22-2010, 02:54 PM #3
    HelicopterJohn
    HelicopterJohn is offline Registered
    Join Date
    Dec 2005
    Posts
    769

    Thanks

    Hi,

    Thanks for the positive comment. It is just one of the many projects I had laying around waiting to be done. It finally made it to the top of the list.
    :banana:
    2007 HAAS TM-1P OneCNC XR5 Mill Pro. Shopbot PRT running Mach3 2010 Screen Set, Super PID and PMDX Electronics.Check out my Gallery on: http://[email protected]
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 1/4 to 1/8 collet adapter?
    By CRFultz in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 04-17-2010, 07:54 AM
  2. 5C Collet Adapter For TL
    By Geof in forum Haas Lathes
    Replies: 12
    Last Post: 12-03-2009, 09:40 PM
  3. Another Source for Collet Bushing Adapters
    By HayTay in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 03-31-2006, 10:53 PM
  4. collet adapter
    By truman in forum MetalWork Discussion
    Replies: 5
    Last Post: 03-25-2006, 03:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules