Have a new-to-me 325 Journeyman with Dynapath 20 control. Found a bad fuse on the spraymist power (spraymist unit replaced with new old stock unit...but old unit didn't appear to have any shorts...the new unit was cheaper than rebuild parts).

Anyway, the question: Does the Dynapath actually control M07 spray or M08 flood commands? I have only just began running the machine for testing and found the blown fuse. M07 doesn't seem to do anything, but the spraymist is turned on when the spindle starts and appears to go off with the spindle...are the two connected. Guess I can run further down the schematics...but though it easier to ask.