Just updated my machine with an MK3/4 board and running TNG. Love the performance, but have a small issue.
I am running a laser on the Pin 1 output for spindle control.
I run this file and if I stop it in the middle, the laptop disconnects from the controller. Also when the files ends it disconnects before returning to 0,0
The file is created with Lightburn GRBL 1.1 I removed most of the middle section as it was to big to post. Also included my settings file as that seems to be standard procedure.
Thanks Bruce
Thread: Disconnect when stopping.
Results 1 to 5 of 5
-
04-13-2020, 03:21 PM #1
- Join Date
- Jun 2019
- Posts
- 6
Disconnect when stopping.
-
04-15-2020, 06:02 PM #2
Moderator
- Join Date
- Mar 2017
- Posts
- 1495
Re: Disconnect when stopping.
My first guess would be USB interference because of power surge at end.
-
04-15-2020, 10:57 PM #3
- Join Date
- Jun 2019
- Posts
- 6
Re: Disconnect when stopping.
Nope.
All other files work fine. Again if I stop the machine while running it does it as well. I think it has something to do with the G91 or the variables in the spindle S command.
Bruce
-
04-16-2020, 03:10 PM #4
Moderator
- Join Date
- Mar 2017
- Posts
- 1495
Re: Disconnect when stopping.
Export your profile and send zip file to our support email.
-
04-16-2020, 03:26 PM #5
- Join Date
- Jun 2019
- Posts
- 6
Re: Disconnect when stopping.
Done. Thanks for the assistance.
Bruce
Reply With QuoteSimilar Threads
-
Need help 426 Z axis disconnect
By vutuan in forum FanucReplies: 3Last Post: 01-10-2019, 05:49 PM -
power disconnect
By murphdog in forum Haas MillsReplies: 3Last Post: 01-24-2014, 10:57 PM -
Tachogenerator disconnect alarm on 10T
By Crashmaster in forum FanucReplies: 5Last Post: 10-09-2007, 09:35 PM -
Need disconnect for powerfeed
By Chevy-SS in forum Benchtop MachinesReplies: 2Last Post: 04-09-2007, 04:27 PM -
how do I disconnect microswitch?
By jeremyinnys in forum CNC Machine Related ElectronicsReplies: 3Last Post: 10-12-2005, 04:40 PM
Tags for this Thread
Posting Permissions
