A little action around the shop today. Were cutting a 3d face in some redwood and thaught you guys might like to see it. so here it is at Face It CNC redwood 3d cut.wmv - YouTube
Thanks Tom
Results 1 to 10 of 10
Threaded View
-
01-22-2012, 02:56 AM #1
Registered
- Join Date
- Dec 2010
- Posts
- 0
Cutting A 3d Face With My Homemade CNC
Reply With QuoteSimilar Threads
-
Homemade cutting fluid?
By pp7 in forum Benchtop MachinesReplies: 21Last Post: 09-22-2018, 12:28 PM -
3D Cutting a Face
By Leehound in forum VideosReplies: 10Last Post: 03-10-2011, 08:23 AM -
Machine Face + OD, Flip part around, face to length and machine the rest.
By PRINT_FX in forum G-Code ProgramingReplies: 10Last Post: 09-04-2010, 05:02 PM -
Small Face Groove Cutting
By TomL21 in forum MetalWork DiscussionReplies: 6Last Post: 07-29-2009, 11:40 PM -
angular contact bearings face to face??
By powerfade in forum DIY CNC Router Table MachinesReplies: 2Last Post: 06-19-2005, 05:01 AM
Posting Permissions
