G'day.
I have just received and set up a Chinese 6040 CNC machine. All is up and running but I may have (or may not have) unintentionally altered a setting in the Spindle controller via the front panel of the control box.
I'm hoping that someone might be able to note down all of the program settings for me (ie D002 = ???) so that I can check to make sure that I haven't altered anything. It's the 1500w VFD and has PRT-E1500W written just above the LED display.
When I first assembled the machine I am sure that I had the spindle spinning up just by using the knob on the front of the control box. I wasn't able to run any of the other motors until I set up my computer and the Mach3 configuration. Now, I have it all set up, all the axis motors work, but I no longer can get the spindle to run even from the knob on the control box. I'm wondering if I have accidentally changed a program setting in the VFD.