Hi guys,

I have external brake on my servo motor. It has 3 pins. 24v+ , ground and pe for the housing. It required 24v DC.

And on the servo driver cn1 connection there is BRK+& BRK-

Right now the shaft on the motor does not turn as I do not have 24V DC connected to it.

1)Is my understanding right that if I connect 24v to the motor brake it will release the brake and the shaft can turn?
2_ My understanding right that brk+, brk - ,can control the on off , of the brake?
3) Can I leave brk+ and brk - alone for now and just have 24V dc connected all the time to the motor while i do testing procedures.

appreciate your help. so far all my questions get answered and i do appreciate.