I'm shopping for a used 2009 Haas TM-1 for my residential garage shop.

My overhead door is 7ft. ( I understand that I can partially disassemble the machine to get it under that door )

My question is my ceiling height in the garage. It's 104"

On the Haas website it's showing the height for that machine at 106"

So my question...... is there any wiggle room on that 106" ?

I'm just concerned with banging that wire harness against the ceiling anytime the Z axis moves all the way up.

Worse case scenario I could remove some of my metal ceiling panels and retrofit a little pocket in the ceiling to gain a little space.

Any feedback would be great.

Thanks,

Kent