587,837 active members*
3,880 visitors online*
Register for free
Login

Thread: Fanuc Spindle Motor Speed Sensor

Results 1 to 19 of 19

Threaded View

  1. 11-01-2018, 03:23 AM #1
    Shanghyd
    Shanghyd is offline Registered
    Join Date
    Nov 2004
    Posts
    239

    Fanuc Spindle Motor Speed Sensor

    It looks like the previous owner took the speed sensor off the spindle on the lathe I bought from him.
    I'm left with a brown plug that appears to go to the control cabinet wiring. I'm also left with a cut off wire that goes down in to the spindle. I'm guessing this is the thermal sensor wires.
    If the above is correct, where can I get the cable/harness for the speed sensor? Seems to me the plug and cable are integral to the spindle motor.

    Click image for larger version.  Name: InkedFanucSpeedSensorHarness_LI.jpg  Views: 3  Size: 347.5 KB  ID: 405156
    Attached Thumbnails Attached Thumbnails FanucSpeedSensorHarness.JPG  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. LB15 Spindle motor speed sensor & ambient temperature question
    By WC56 in forum Okuma
    Replies: 2
    Last Post: 10-22-2015, 10:35 AM
  2. Spindle speed sensor
    By Shishio Makoto in forum Dynomotion/Kflop/Kanalog
    Replies: 6
    Last Post: 01-07-2015, 09:10 AM
  3. Help chosing a spindle speed sensor to indicate spindle speed in mach3
    By Draax in forum Mach Lathe
    Replies: 1
    Last Post: 08-02-2013, 10:07 PM
  4. spindle speed sensor
    By escowizard in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 08-22-2009, 04:09 AM
  5. Installation of spindle speed sensor
    By Bloy2004 in forum CNC Machine Related Electronics
    Replies: 7
    Last Post: 01-28-2004, 04:50 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules