Hi I have a K40 Laser "700mm Tube" and the PSU just **** it self.

I can wait 2-4weeks to get one.
or...
I can pick up a, what is advertised as a 60W PSU, but the model indicates a 80w "Cloudray MYGJ80W" see attached. for a good price as a quick fix.

I do not need the same pinouts as old PSU as I have replaced the controller and only use HV side of PSU to run Laser.

My thoughts where to use the MYGJ80W PSU till I get a 40W replacment to get me out of trouble.

The Blown 40W PSU Specs: MYJG-40W
25KV
20ma

The quick fix MYGJ-80W
26KV
28ma

My intention is to limit the power on the replacment PSU

I have searched this with a bit of confusion, have noticed comments like tube is only 10-12ma and start voltages/current and so on.

cheers.