Machine struggles to start with SVMX circuit not getting power from relay on DSM1 board. Will sometimes start and will not then the machine off once booted, but we had a power outage and now it is not booting up properly.
Thread: HT 23 lathe won’t power up
Results 1 to 2 of 2
Threaded View
-
11-27-2023, 02:27 AM #1
- Join Date
- Aug 2023
- Posts
- 1
HT 23 lathe won’t power up
Reply With QuoteSimilar Threads
-
Fadal VMC 15 won't power up after power outage
By RMMachine13 in forum FadalReplies: 10Last Post: 01-28-2020, 07:32 PM -
2012 TL-1 Won't power up, bad power board?
By Tungsten808 in forum Haas LathesReplies: 5Last Post: 12-28-2017, 06:52 AM -
What,to do when you don't have a lathe and a vertical lathe won't do.
By AUSTINMACHINING in forum NovakonReplies: 1Last Post: 02-20-2017, 04:38 AM -
MD-3 won't power up
By Scrambled1 in forum HURCOReplies: 3Last Post: 05-01-2015, 04:59 PM -
LB-15 won't power up
By nlh in forum OkumaReplies: 7Last Post: 01-22-2011, 11:10 PM
Tags for this Thread
Posting Permissions
