We need more information. What breakout board are you feeding the UC100 into? And, what PWM base frequency for the spindle speed signal does the breakout board require?
Cheers
Peter
Sent from my iPhone using Tapatalk Pro
Thread: UC100 and Spindle speed off
Results 1 to 7 of 7
Threaded View
-
02-15-2024, 02:10 AM #2
Member
- Join Date
- Aug 2005
- Posts
- 1133
Re: UC100 and Spindle speed off
-------------------------------------------------
Homann Designs - http://www.homanndesigns.com/store
Reply With QuoteSimilar Threads
-
Mori seiki MV 40 Spindle Drive speed does not match S-code speed
By Hanzz in forum FanucReplies: 7Last Post: 07-15-2021, 05:24 AM -
high speed and low speed dual spindle CNC mill
By GusBiz in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 02-13-2021, 08:54 AM -
Can UC100 Run At 400Khz So 6040 Spindle Runs 24,000 RPM
By eddiegnz1 in forum Machines running Mach SoftwareReplies: 4Last Post: 06-13-2019, 03:20 AM -
Help chosing a spindle speed sensor to indicate spindle speed in mach3
By Draax in forum Mach LatheReplies: 1Last Post: 08-02-2013, 10:07 PM -
BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?
By peter.blais in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 08-08-2006, 09:29 AM
Tags for this Thread
Posting Permissions
