Hello, I am considering to build a machine with one ball screw on the left and the other ball screw on the right to generate vertical motion. Is it necessary/highly recommended to add an additional linear rail or two next to each ball screw? Is one linear rail next to a ball screw on each side already sufficient?
Results 1 to 12 of 12
Threaded View
-
02-17-2024, 07:49 PM #1
Registered
- Join Date
- Jun 2015
- Posts
- 16
Do I need linear rail next to ball screw on the vertical axis?
Reply With QuoteSimilar Threads
-
Ball Screw & Linear rail protection, maintenance and lubrication.
By CLEFAVOUR in forum CNC "do-it-yourself"Replies: 3Last Post: 05-03-2023, 09:18 PM -
Design Input on CNC Router 900mm X 1500mm with 20mm Linear Rail and Ball Screw
By kinghong1970 in forum DIY CNC Router Table MachinesReplies: 7Last Post: 03-06-2021, 04:51 AM -
supermax vertical ball screw repair
By Jetpylot33 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 10-08-2009, 05:03 AM -
Ball screws and linear rail
By mike2768 in forum DIY CNC Router Table MachinesReplies: 10Last Post: 06-06-2009, 03:17 PM -
Caps for screw on linear rail
By millman52 in forum Plasma, EDM / Other similar machine Project LogReplies: 7Last Post: 04-21-2009, 02:42 PM
Tags for this Thread
Posting Permissions
