Hi
I'm having issues with getting the Z height to follow the settings I've entered in the "Tool Change" dialog box with Partmaster 15 and Mach4.
It seems that whatever I enter in the "Tool Change" settings it doesn't seem to be followed and the Z axis does not allow enough clearance to change the tool.
This is a manual change situation.
Any help would be appreciated.
Thanks
Phil
Results 1 to 3 of 3
Threaded View
-
04-26-2024, 01:12 AM #1
- Join Date
- Aug 2021
- Posts
- 26
Manual Tool Change - Dolphin CAM doesn't seem to follow settings
Reply With QuoteSimilar Threads
-
MDI Doesn’t work after tool change?
By Se5a in forum FanucReplies: 0Last Post: 02-18-2021, 05:46 PM -
When switching tools on a Haas is it necessary to change all of the tool settings ?
By kentdesautel13 in forum MillingReplies: 1Last Post: 08-13-2019, 08:36 PM -
HSK Style Tool Holder Manual Tool Change Spindles
By tinmancarving in forum Spindles / VFDReplies: 9Last Post: 10-01-2018, 08:05 PM -
Benchman 4500 Change Manual Settings
By kbrodrick in forum Benchtop MachinesReplies: 0Last Post: 05-03-2012, 10:41 PM -
Multicam Router/Doesn't follow mastercam Z depths
By jbcourt in forum Multicam MachinesReplies: 6Last Post: 09-20-2011, 05:12 PM
Tags for this Thread
Posting Permissions
