I'm playing around with the idea of designing a Flash based screenset for router use. I'm sure that most users don't use 80% or more of what's in Mach3. With that in mind, here's a basic outline.
What I'm looking to do, is have a screen for loading files only. It'll show the code and the toolpath, and have a few file related buttons and a few more that may be needed. I have a sample attached. Then, another screen for running programs. This screen will NOT have a toolpath display on it. Mach3's toolpath display requires a lot of processor power, so not having it on while running programs should help Mach3 run a little easier. Basically everything you need to run your machine should be on this screen. Not having a toolpath display opens up a bit of room here.
I'll also add simplified settings and diagnostics screens as well, which will only contain need items. Throw in an offsets screen as well.
The main reason for this post is to ask everyone, What features do you actually use in Mach3? Which buttons, DRO's, LED's......?
Even though this will be designed around the machine I'm designing, I'll try to make something that others can use with minor mods, or I'll do a generic version at the same time.
Comments appreciated.