Hey Guys,

I have a SL-10 question. I have been running a Hardinge with Fanuc controls for about 2.5 years now and we just purchased a Haas SL-10 Lathe. On the fanuc controls i use a subroutine program for a safe index point for each tool change. Here is what the code looks like...

O0001
G0G40G97G98G80
T0
X#501Z#502
M99

Pretty simple, at the begining of the program the i'm running i put in these values

#501 = 6.0
#502 = 6.0

M98P1


This makes the turrent go to that location before making a tool change. I can't get my haas to work with this programming. I'm sure that I'm doing some thing wrong. Any help would be greatly appriciated.

Thanks
Josh