Hi All!
I need to make some deep (2.5 and 1.5 mm diam and 43 or 23 mm deep) holes in special optical glass. It is quite hard (about 85 HRA or 820 HV) so I think here diamond or cBN tools needed. Anyone knows manufacturers of such tools?
Thread: Drills and Mills for Glass
Results 1 to 3 of 3
Threaded View
-
07-21-2010, 02:55 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 29
Drills and Mills for Glass
Reply With QuoteSimilar Threads
-
good "economy" drills/mills?
By slade17 in forum Metalworking- / Woodworking Tooling / Manual MachiningReplies: 4Last Post: 07-21-2010, 07:27 PM -
There's Drills, Mills and Mill/Drills so what's the....
By JWB_Machining in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 05-20-2009, 03:04 PM -
Mounting rails on glass - how flat is glass?
By Swiss in forum Linear and Rotary MotionReplies: 50Last Post: 07-25-2008, 08:10 AM -
Resharpening of Drills end mills
By brainlessme in forum Toolgrinding / Toolgrinding MachinesReplies: 4Last Post: 04-29-2007, 07:33 AM -
Face Mills intstead of end mills
By balal in forum MetalWork DiscussionReplies: 8Last Post: 07-01-2006, 06:35 AM
Posting Permissions
