Hey guys, i'm trying to cut a 17mm x 1.50 thread on my lathe and i'm having some troubles. I only have enough experience to write programs with IGF feature then i am able to go back and edit.I typically machine everything in inches and now I have a job that requires a metric thread and i'm stumped!!! I got my IGF scren to display metric on every dimension ,however when it asks for thread dimensions it asks for TPI and you cant input a decimal point for the pitch of 1.50. Could someone look at my line of programming and point me in the rite direction: G71X16.2Z-13.5H0.0866D0.5U0.1B60F1J1.5M22M73M32