[louieatienza]

here is my latest creation and let me tell you, dealing with heavy metal is ......well hard! yesterday i was so tired that i went out for a coffe. today is the 5'th day working on this preject and it is coming out nicely, the z axis i had ready made just needed to drill holes, the y axes got done and tested today, did precision testing on it and after 15 back and forth movements of 1 meter it parked itself on 0, that is measured with a scale of 0.01 mm, and it was expected to be like that since i am using 38mm NSK screws with double ball nuts. Again sorry for the pictures but my bro has snached both nikon cameras ( D50 and D5000 ) so expect better pictures tomorrow.Rails are hiwin 25mm so everything on this build costs an arm and a leg. Initialy it will be driven by NEMA 34 steppers and geckodrive G212 to be later replace by G320 and servos.
P.S. ataching photos not working !!!

Sounds massive! Did you shrink the pics to 1000 pixels wide?