[SpeedyDad]

So is the Ridgid 2401 the preferred choice for this machine? I'm not really set on a router yet, so whatever people like best, I'll go for. I like to learn from others' mistakes

I think most are using the Colts but the latest batches seem to have the spindle problem so I am sticking with the Ridgid. It may not be as powerful but I'll take that over the spindle issues any day. The machine was designed around the 2400 and the 2401 isn't much different. The mount in the drawings works for it. For now, I'll turn mine on and off with the switch but a SuperPID is in my future hopefully.

[TeslaFreakshow]

I think most are using the Colts but the latest batches seem to have the spindle problem so I am sticking with the Ridgid. It may not be as powerful but I'll take that over the spindle issues any day. The machine was designed around the 2400 and the 2401 isn't much different. The mount in the drawings works for it. For now, I'll turn mine on and off with the switch but a SuperPID is in my future hopefully.

My mounts didn't fit very well the rigid has a threaded rod on it for adjust the cut depth when using it as a normal router and that was hitting the clamp i had to take the whole thing apart remove those parts and then dremel the plastic flat on the outside to get it to fit. Ill have ot post pics of the horrible looking things I did to it.