603,942 active members*

4,713 visitors online*

Register for free

Login

IndustryArena Forum > WoodWorking Machines > DIY CNC Router Table Machines > CNC Wood Router Project Log > Big Bamboo - New Machine Project Started

Thread: Big Bamboo - New Machine Project Started

Results 1 to 20 of 649

Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

JerryBurks Big Bamboo - New Machine... 08-29-2011, 12:12 AM

JerryBurks Here some pictures of my... 08-29-2011, 12:22 AM

JerryBurks As I learned the NEMA34... 08-29-2011, 12:35 AM

technodream how accurate is the setup... 08-29-2011, 02:13 PM

JerryBurks Obviously I don't know yet... 08-29-2011, 04:22 PM

louieatienza Since you have these powerful... 08-30-2011, 06:16 AM

ger21 If you can somehow add a... 08-29-2011, 03:20 PM

JerryBurks Thanks for the hint, I am... 08-29-2011, 04:38 PM

stevespo Jerry, It's great to see... 08-29-2011, 08:24 PM

JerryBurks Bearings of that size are... 08-29-2011, 09:41 PM

RomanLini That sounded a little... 08-30-2011, 01:07 PM

JerryBurks Well, don't know. This... 08-30-2011, 05:21 PM

JerryBurks I did some more research and... 08-30-2011, 07:30 PM

Kazik_Wichura It is a pity that I can not... 07-03-2012, 11:35 AM

JerryBurks Bamboo is great but Baltic... 07-04-2012, 04:01 AM

JerryBurks New Electronics Control Box... 07-10-2012, 05:09 AM

stevespo Ah, yes those load ratings... 08-29-2011, 10:43 PM

JerryBurks Agreed. But I mentioned... 08-30-2011, 05:14 PM

ger21 Do not disassemble them, or... 08-30-2011, 08:32 PM

JerryBurks :eek: O.K. thanks, did not... 08-31-2011, 04:37 AM

RomanLini Yes! Don't disassemble the... 08-31-2011, 12:09 PM

JerryBurks That is great info. I had... 08-31-2011, 03:58 PM

JerryBurks Somewhat slow progress due to... 09-02-2011, 04:38 AM

CarveOne No matter how true you make... 09-02-2011, 12:39 PM

More replies below current depth...

RomanLini It looks nice and beefy! :) ... 09-06-2011, 03:36 PM

JerryBurks That is the idea. Given that... 09-06-2011, 04:07 PM

JerryBurks I found an interesting... 09-10-2011, 02:53 AM

louieatienza In my parent's home country... 09-10-2011, 03:14 AM

More replies below current depth...

RomanLini Nice work on the plates! Did... 09-11-2011, 10:59 AM

JerryBurks Well, yes and no. The motor... 09-11-2011, 05:37 PM

louieatienza Nice work on the metal! ... 09-12-2011, 02:33 AM

JerryBurks Thanks, I am quite happy with... 09-12-2011, 03:26 AM

RomanLini Hmm, sorry to have been the... 09-12-2011, 02:06 PM

JerryBurks Yes, that is the chart I... 09-12-2011, 03:59 PM

RomanLini Thanks for the info. :) I... 09-13-2011, 09:23 PM

JerryBurks Got some more work done over... 09-17-2011, 06:19 AM

JerryBurks I had some difficulty,... 09-25-2011, 12:34 AM

ger21 If your table is square, the... 09-25-2011, 02:05 AM

RomanLini What I have done is clamp a... 09-25-2011, 09:35 AM

JerryBurks Thanks for the ideas. I will... 09-26-2011, 02:00 AM

ger21 Get some wooden dowels the... 09-26-2011, 02:37 AM

JerryBurks I started playing with the... 09-27-2011, 03:51 AM

RomanLini Hi again JerryBurks. :) Is... 09-27-2011, 07:52 AM

JerryBurks Yes this is the opposite end... 09-27-2011, 03:48 PM

RomanLini Ahah! Thanks for clarifying.... 09-28-2011, 07:00 AM

JerryBurks Another week passed....I... 10-02-2011, 06:15 AM

RomanLini Excellent work on the... 10-06-2011, 08:15 AM

JerryBurks Thanks...I am an office guy... 10-06-2011, 10:01 PM

louieatienza I have the same ballscrew... 10-06-2011, 11:04 PM

JerryBurks I hope this picture explains... 10-07-2011, 05:11 PM

ger21 10/1000 = .01" ;) 10-07-2011, 12:05 AM

louieatienza Yes it does... reading too... 10-07-2011, 01:03 AM

JerryBurks yes it is annoying. If I... 10-07-2011, 01:36 AM

RomanLini Re the grubscrews on the... 10-07-2011, 04:36 PM

JerryBurks Well, this is my first... 10-07-2011, 05:09 PM

RomanLini Nice diagram! It's looking... 10-08-2011, 07:51 AM

JerryBurks I played with this layout for... 10-09-2011, 03:01 AM

JerryBurks Next step....Y-plate attached... 10-09-2011, 03:21 AM

PaulRowntree How much force was required... 10-09-2011, 04:20 AM

JerryBurks I did not test that but since... 10-09-2011, 05:27 AM

RomanLini Yeah 10" apart is pretty... 10-09-2011, 09:26 AM

JerryBurks Not at all.....besides just... 10-09-2011, 04:00 PM

JerryBurks Installed one of the lead... 10-10-2011, 01:57 AM

RomanLini That's definitely the biggest... 10-10-2011, 08:36 AM

CarveOne True it up on a lathe and... 10-10-2011, 12:43 PM

JerryBurks That was a very unscientific... 10-10-2011, 04:14 PM

CarveOne If you use Gecko drives you... 10-10-2011, 07:53 PM

JerryBurks Now you tell me :devious: ... 10-11-2011, 05:35 AM

RomanLini It sounds like you are back... 10-11-2011, 06:02 AM

JerryBurks No, not really. I am not... 10-11-2011, 06:22 AM

CarveOne There are two major features... 10-11-2011, 12:19 PM

louieatienza You might try adding weight... 10-11-2011, 12:40 PM

JerryBurks Good point, I will try that.... 10-11-2011, 03:42 PM

JerryBurks I noticed the mention of the... 10-11-2011, 04:04 PM

CarveOne Both the G250X and the G251X... 10-12-2011, 12:44 AM

RomanLini I'm a bit stumped why your... 10-13-2011, 08:43 PM

JerryBurks I don't know either but then,... 10-13-2011, 10:03 PM

ger21 You're not trying to run... 10-14-2011, 12:18 AM

JerryBurks I was tempted :rolleyes:... 10-14-2011, 01:59 AM

CarveOne I'm using a 72vdc 20 amp... 10-14-2011, 03:06 AM

PaulRowntree I REALLY like your thinking... 10-14-2011, 03:12 AM

JerryBurks Well, I have to burst your... 10-14-2011, 03:58 AM

JerryBurks X-axis is now also moving... 10-22-2011, 04:49 AM

RomanLini Good to see it coming along!... 10-22-2011, 10:43 PM

JerryBurks Makes sense...I just wanted... 10-23-2011, 07:37 AM

RomanLini Haha! Comeon now you're going... 10-24-2011, 12:57 AM

JerryBurks Well, why not....wooden lead... 10-24-2011, 05:12 AM

JerryBurks Anyway, I am not going that... 10-24-2011, 05:21 AM

PaulRowntree I have to admit that the... 10-25-2011, 02:21 AM

More replies below current depth...

ger21 Plyboo is one brand name.... 10-29-2011, 02:40 AM

JerryBurks Keep in mind the Bamboo was... 10-29-2011, 04:20 AM

RomanLini That is very interesting!... 10-31-2011, 01:29 AM

JerryBurks It does not splinter like... 10-31-2011, 05:14 AM

boblon All that aside, that is one... 10-30-2011, 01:53 AM

JerryBurks Hey, thanks....constructive... 10-30-2011, 06:34 AM

RomanLini It's a very interesting... 11-01-2011, 12:40 AM

JerryBurks Started working on the... 11-01-2011, 07:01 AM

cornbinder23 Hey that looks familiar, mine... 11-02-2011, 01:19 AM

JerryBurks Great minds think alike ;) ... 11-03-2011, 05:55 PM

tjb1 What are the displays for? 11-03-2011, 10:30 PM

cornbinder23 DC voltage and spindle... 11-04-2011, 05:02 AM

RomanLini I like an analogue (dial)... 11-04-2011, 07:42 AM

JerryBurks Finished the control box. Not... 11-06-2011, 03:48 AM

JerryBurks I did a first real... 11-08-2011, 06:09 AM

JerryBurks I did not have much time to... 11-12-2011, 06:42 AM

RomanLini That's really looking like a... 11-12-2011, 09:02 AM

JerryBurks No kidding....I am getting to... 11-14-2011, 05:57 AM

DonFrambach Very clever dust skirt... 11-14-2011, 06:26 AM

JerryBurks Not yet but I will, at least... 11-14-2011, 07:13 AM

More replies below current depth...

pippin88 Re: Big Bamboo - New Machine... 08-24-2021, 08:13 AM

JerryBurks Re: Big Bamboo - New Machine... 10-22-2021, 02:07 AM

prcdslnc13 Where are you at that you can... 11-17-2011, 08:41 PM

JerryBurks I got mine at Pacific Western... 11-17-2011, 10:01 PM

JerryBurks I still had a bunch of cutoff... 11-20-2011, 12:58 AM

CNC Lurker I think that's the first DIY... 11-20-2011, 04:12 AM

JerryBurks Really? Well, maybe another... 11-21-2011, 07:36 AM

JerryBurks Limited progress the last 2... 12-07-2011, 04:40 AM

RomanLini Haha we aren't reviewing your... 12-07-2011, 09:48 AM

More replies below current depth...

RotarySMP Nice job 12-09-2011, 01:51 PM

JerryBurks Thanks....actually I built... 12-09-2011, 07:36 PM

JerryBurks I am sooooo disappointed... 12-10-2011, 03:38 AM

RomanLini Yeah I just tell it where to... 12-09-2011, 11:06 AM

RotarySMP Does the Hitachi VFD allow... 12-10-2011, 01:10 PM

ger21 My guess is the problems are... 12-10-2011, 02:23 PM

RotarySMP Do you have a link to the... 12-10-2011, 05:07 PM

JerryBurks I adjusted the gantry... 12-11-2011, 06:54 AM

PaulRowntree That is a very cool... 12-11-2011, 06:25 PM

JerryBurks I use an older "Supereyes"... 12-12-2011, 01:35 AM

JerryBurks No I don't. I just read the... 12-12-2011, 01:47 AM

johnjblair Any Update? 01-10-2012, 04:29 AM

JerryBurks Hey thanks! I got a bit... 01-10-2012, 05:40 PM

More replies below current depth...

RomanLini Wow! I'm sure that stuff is... 01-18-2012, 12:31 PM

ger21 You probably could if they... 01-18-2012, 06:08 PM

DonFrambach I just HAVE to get some... 01-19-2012, 08:08 PM

JerryBurks Just noticed you are... 01-19-2012, 09:39 PM

DonFrambach Will do. Would be great to... 01-19-2012, 10:05 PM

JerryBurks And now for something really... 01-22-2012, 12:52 AM

More replies below current depth...

RomanLini Very nice Jerry! That's both... 01-29-2012, 03:31 PM

ger21 That is very cool indeed. ... 01-29-2012, 03:38 PM

JerryBurks You are right, I will have to... 01-30-2012, 04:40 AM

RomanLini Jerry that is a great idea... 01-30-2012, 08:34 PM

JerryBurks Yes I am a bit skeptical... 01-31-2012, 12:31 AM

PaulRowntree Would a centrifugal... 01-31-2012, 05:52 AM

JerryBurks Probably...but I should make... 02-01-2012, 07:04 AM

JerryBurks I know that may be a bit anal... 02-08-2012, 06:37 AM

RomanLini That's a cool looking dial... 02-08-2012, 09:09 AM

ger21 I've heard a Bridgeport will... 02-08-2012, 05:49 PM

JerryBurks That would not be surprising.... 02-08-2012, 07:32 PM

RomanLini Just throw a string over the... 02-09-2012, 01:20 PM

JerryBurks Yes, I agree, that is a... 02-10-2012, 03:13 AM

More replies below current depth...

JohnZ Are your pillow blocks... 02-13-2012, 06:12 AM

JerryBurks Yes and no... The fist set... 02-13-2012, 05:33 PM

RomanLini Thanks for the data Jerry... 02-15-2012, 09:42 AM

JerryBurks Better Late than Never.. 02-26-2012, 03:52 AM

PaulRowntree Would you say then that the... 02-26-2012, 04:22 AM

JerryBurks Yes, I would say so and yes,... 02-26-2012, 04:29 AM

RomanLini An obvious improvement would... 02-26-2012, 02:58 PM

JerryBurks Absolutely....I am not about... 02-26-2012, 08:26 PM

Drools I would be interested to see... 02-26-2012, 09:20 PM

JerryBurks If you can provide me a solid... 02-27-2012, 06:01 PM

JerryBurks Dust protection finished 03-05-2012, 03:33 AM

DonFrambach That dust cover on your... 03-05-2012, 03:46 AM

More replies below current depth...

kinghong1970 wow! i am amazed at your... 03-09-2012, 03:55 AM

JerryBurks I'll keep my 1-hp... 03-10-2012, 06:17 AM

kinghong1970 wow... that looks like a lot... 03-10-2012, 06:32 AM

JerryBurks disagree....that is where the... 03-10-2012, 07:02 AM

Mauser One bit of advice, don't nest... 03-10-2012, 12:10 PM

JerryBurks Thanks for the tip. I am... 03-10-2012, 06:01 PM

ger21 I'm thinking about building... 03-10-2012, 02:11 PM

JerryBurks That is a very clean build,... 03-10-2012, 06:18 PM

harryn For dust management, my... 03-11-2012, 05:32 AM

JerryBurks I did not consider going that... 03-12-2012, 06:02 PM

JerryBurks More weekend work....I... 03-13-2012, 03:14 AM

kinghong1970 hahaha! those led strips are... 03-13-2012, 04:49 AM

JerryBurks Dust Boot Finished 03-18-2012, 06:39 AM

Miata2k Jerry, I really like the... 03-19-2012, 04:38 PM

JerryBurks Thanks for the hint. Now I... 03-19-2012, 06:59 PM

JerryBurks I am quite happy with the... 03-19-2012, 08:24 PM

Mauser I have one of those cooking... 03-18-2012, 07:35 AM

JerryBurks Just to be on the safe... 03-18-2012, 05:47 PM

kinghong1970 pc modding folks uses LED... 03-19-2012, 09:42 PM

JerryBurks Well, actually the way I... 03-20-2012, 05:51 AM

RomanLini Nice work on the LEDs and... 03-20-2012, 04:32 PM

JerryBurks I believe I qualify as a... 03-20-2012, 07:57 PM

RomanLini It will probably work for... 03-21-2012, 04:30 PM

JerryBurks I hear you...and the voltage... 03-21-2012, 04:48 PM

RomanLini Thanks for the tip on the... 03-26-2012, 04:50 PM

JerryBurks I had such a dust box with... 03-26-2012, 05:14 PM

zool Jerry stated: "I would... 03-28-2012, 01:18 AM

louieatienza I'm sure she'll love it when... 03-28-2012, 05:34 AM

More replies below current depth...

Mauser That's very impressive! The... 04-29-2012, 09:40 PM

JerryBurks I have 8" clearance under the... 04-30-2012, 04:13 AM

Drools Thanks for the update Jerry,... 04-29-2012, 11:48 PM

JerryBurks That would be an interesting... 04-30-2012, 04:29 AM

JerryBurks Hey Drools, I found... 05-02-2012, 07:00 PM

Drools Thanks Jerry, that is a nice... 05-02-2012, 07:46 PM

JerryBurks Just for fun I purchased the... 05-06-2012, 04:43 AM

Drools Please make a video :) I... 05-07-2012, 10:27 PM

JerryBurks O.K. I will do that after I... 05-12-2012, 07:44 AM

JerryBurks The continuous 3d rotary... 05-29-2012, 06:09 AM

Drools Looks good Jerry, what kind... 05-30-2012, 02:06 AM

JerryBurks Curly Maple. The local... 05-30-2012, 04:10 PM

JerryBurks Summer Upgrade 06-12-2012, 04:53 AM

CarveOne Get a Keling 72vdc linear... 06-12-2012, 11:24 AM

ger21 72V is too high for those... 06-12-2012, 04:58 PM

CarveOne Yep, Gerry's right. I didn't... 06-12-2012, 06:44 PM

JohnZ Is that formula to be used by... 06-12-2012, 07:32 PM

Drools Is this your kit Jerry?... 06-12-2012, 07:54 PM

JerryBurks Pretty close, except that I... 06-12-2012, 08:19 PM

ger21 I thought is was for all... 06-12-2012, 11:28 PM

JerryBurks That is not clear to me, at... 06-13-2012, 12:07 AM

JohnZ Hmmm, this is very... 06-13-2012, 12:28 AM

JerryBurks Not too bad. 06-14-2012, 06:10 AM

CarveOne If you get concerned about... 06-14-2012, 12:11 PM

BanduraMaker Here's a really cool solution... 06-16-2012, 03:38 PM

JerryBurks One last project before I... 06-23-2012, 04:18 AM

RomanLini I've got dual shaft size23... 06-16-2012, 09:39 AM

CarveOne I like it! Small AC motors... 06-16-2012, 11:27 AM

RomanLini Yeah why not? :) It shouldn't... 07-02-2012, 09:58 AM

JerryBurks Ah, no problem. It's related ... 07-02-2012, 02:57 PM

RomanLini That's a valid point for... 07-03-2012, 08:57 AM

Drools Nice work Jerry! 06-23-2012, 04:41 AM

harryn That is some really nice... 07-02-2012, 06:34 AM

JerryBurks Increasing the voltage from... 07-02-2012, 03:06 PM

JohnZ A linear power supply is... 07-02-2012, 11:23 PM

Drools Great Work Jerry. Hey did... 07-10-2012, 08:43 PM

JerryBurks Nah, I got stuck with... 07-11-2012, 04:54 AM

Drools Yep I agree, making the... 07-12-2012, 02:22 AM

JerryBurks Well, yes and no. The machine... 07-13-2012, 03:50 AM

JerryBurks Not much progress lately due... 07-31-2012, 04:36 AM

harryn There is a reason the world... 08-01-2012, 04:58 PM

More replies below current depth...

RomanLini Wow that's a big set of... 09-17-2012, 02:06 PM

fatal-exception I think I would have used... 09-17-2012, 06:34 PM

Mauser It strikes me that that... 09-21-2012, 09:19 AM

JerryBurks While I like to watch the... 09-23-2012, 03:35 AM

RomanLini Wow! Even the parts of my... 09-21-2012, 07:06 PM

Drools very interesting code Jerry,... 10-09-2012, 06:32 PM

dodger889 Jerry that is some nice work... 10-15-2012, 03:39 AM

harryn That is a neat video. I am... 10-17-2012, 08:04 AM

JerryBurks Yes that would be neat but I... 10-19-2012, 04:09 PM

dodger889 You have to think about all... 10-20-2012, 04:36 AM

More replies below current depth...

ger21 I use short length 1/4" drill... 10-26-2012, 06:58 PM

JerryBurks Ah, interesting, maybe I can... 10-27-2012, 05:12 PM

louieatienza A drill mill would probably... 10-27-2012, 09:13 PM

Mauser Personally, I'd just post... 10-27-2012, 10:33 PM

More replies below current depth...

ger21 Usually about 50ipm, with ... 10-27-2012, 05:23 PM

steve123 It looks like you are... 10-27-2012, 11:03 PM

JerryBurks Oh yes, that would be bad... 10-28-2012, 03:25 AM

BanduraMaker Jerry, That is absolutely... 01-06-2013, 02:36 PM

ger21 As Andy said, outstanding... 01-06-2013, 02:55 PM

JerryBurks Thanks guys, this seems to be... 01-07-2013, 04:04 AM

dodger889 Just a thought if you could... 01-07-2013, 05:19 AM

Devastator Very impressive! How about... 01-07-2013, 08:33 AM

vtx1029 Nice job! :idea: 01-07-2013, 12:54 PM

More replies below current depth...

JohnZ Just watched your video. ... 01-06-2013, 05:28 PM

Guest Very nifty clamps there! I... 03-06-2013, 07:45 AM

Guest I know, I tend to over-design... 03-06-2013, 05:12 PM

JerryBurks Back to business....I had to... 03-22-2013, 03:07 AM

Guest Looks really good Jerry! ... 03-06-2013, 02:01 PM

Guest Well, that is a real good... 03-06-2013, 05:25 PM

Guest So here was my thoughts on... 03-06-2013, 06:52 PM

JerryBurks I found aligning the chuck... 03-08-2013, 03:02 AM

More replies below current depth...

Guest Very nifty clamps there! I... 03-21-2013, 03:06 AM

Guest Very nifty clamps there! I... 03-21-2013, 01:07 PM

Aquaaddict They sound like interesting... 03-23-2013, 03:47 AM

JerryBurks The company I work for makes... 03-23-2013, 05:18 AM

JerryBurks Contour Shuttle "MPG" on the... 06-09-2013, 03:37 AM

JerryBurks Deep machining with 4" end... 06-30-2013, 03:52 AM

robe_uk Nice machining, am impressed... 03-23-2013, 12:42 PM

JerryBurks Aluminum polishes nicely. I... 03-24-2013, 06:33 AM

Devastator That's pretty cool. I wonder... 06-30-2013, 10:53 PM

JerryBurks As for longevity see the last... 07-01-2013, 07:30 PM

JerryBurks I expanded the vacuum setup... 12-09-2013, 02:56 AM

JerryBurks I have been experimenting... 11-28-2013, 09:50 PM

Eric603 I do not have Mach3 but the... 04-12-2013, 03:24 AM

SixOfOne That looks great Jerry! I... 05-10-2013, 04:04 AM

Devastator very pretty...... 11-05-2013, 02:54 AM

DonFrambach Congratulations Jerry! Your... 05-14-2013, 04:13 AM

JerryBurks Thanks Don, that was a nice... 05-14-2013, 03:41 PM

DonFrambach Oops! All SIX boards. 05-14-2013, 04:14 AM

JerryBurks O.K., it is not a Paradise... 11-24-2013, 01:00 AM

vtx1029 Yea I agree that cut 3d is... 07-01-2013, 01:48 PM

JerryBurks DeskProto has a lot of... 07-01-2013, 07:25 PM

nlancaster that is a neet lazy susan... 11-05-2013, 01:30 AM

nlancaster oops, wrong thread. 11-09-2013, 06:27 AM

Trotline I've been puzzling over your... 11-24-2013, 07:49 AM

JerryBurks Not marbles (they are not... 11-25-2013, 07:12 AM

JerryBurks Some more decorative stuff... 01-09-2014, 10:55 PM

ecurb5 Would you be willing to... 01-10-2014, 11:33 PM

More replies below current depth...

JerryBurks Re: Big Bamboo - New Machine... 04-03-2014, 06:35 PM

JerryBurks No progress publishing... 02-09-2014, 06:39 AM

More replies below current depth...

CarveOne Re: Big Bamboo - New Machine... 06-05-2014, 10:25 AM

ger21 Vacuum is a great thing. :) 11-29-2013, 02:09 AM

JerryBurks Yes! I wasted 2 years with my... 11-30-2013, 04:45 AM

dedeer Hi Jerry , your mashine is... 12-24-2013, 12:44 AM

JerryBurks Well, the linear bearings are... 12-24-2013, 01:22 AM

dedeer Thanks for the reply. One... 12-26-2013, 07:15 PM

JerryBurks The first set that I bought... 12-27-2013, 05:18 PM

dmalicky The photo dedeer posted is a... 12-27-2013, 08:39 PM

dedeer It would be great if you... 12-29-2013, 10:07 PM

widgitmaster Outstanding! 01-09-2014, 11:01 PM

JerryBurks Since I started working with... 02-20-2014, 03:30 AM

cdrd03 That is a great idea and nice... 02-20-2014, 06:24 AM

JerryBurks Re: Big Bamboo - New Machine... 06-05-2014, 04:18 AM

Devastator Re: Big Bamboo - New Machine... 05-31-2014, 03:38 AM

matth Very impressive work. 01-09-2014, 11:04 PM

dmalicky Wow-sweet! 01-09-2014, 11:05 PM

Miata2k You have some really... 01-10-2014, 12:45 AM

JerryBurks Well, the wave is to... 01-10-2014, 03:21 AM

Wolffie Hi Jerry Jyst a small... 01-10-2014, 02:53 PM

More replies below current depth...

Devastator Impressive work on that bowl.... 03-20-2014, 05:49 PM

More replies below current depth...

JerryBurks Re: Big Bamboo - New Machine... 08-26-2014, 04:40 AM

JerryBurks Another decorative/utility... 03-17-2014, 01:47 AM

Devastator Re: Big Bamboo - New Machine... 06-05-2014, 03:55 PM

JerryBurks I needed urgently a simple go... 03-12-2014, 11:29 PM

ger21 Re: Big Bamboo - New Machine... 04-03-2014, 07:44 PM

JerryBurks Re: Big Bamboo - New Machine... 04-03-2014, 08:42 PM

JerryBurks Re: Big Bamboo - New Machine... 09-22-2014, 04:10 AM

JerryBurks Re: Big Bamboo - New Machine... 12-06-2014, 06:24 AM

mountaindew Re: Big Bamboo - New Machine... 08-27-2014, 01:22 PM

JerryBurks Re: Big Bamboo - New Machine... 08-27-2014, 04:29 PM

JerryBurks Re: Big Bamboo - New Machine... 12-06-2014, 06:22 AM

JerryBurks Re: Big Bamboo - New Machine... 01-04-2015, 12:53 AM

pippin88 Re: Big Bamboo - New Machine... 09-22-2014, 08:14 AM

mountaindew Re: Big Bamboo - New Machine... 11-22-2014, 12:43 AM

JerryBurks Re: Big Bamboo - New Machine... 11-25-2014, 11:11 PM

mountaindew Re: Big Bamboo - New Machine... 11-26-2014, 01:21 PM

pippin88 Re: Big Bamboo - New Machine... 12-07-2014, 07:21 AM

JerryBurks Re: Big Bamboo - New Machine... 12-11-2014, 04:58 PM

nlancaster Re: Big Bamboo - New Machine... 12-11-2014, 08:05 PM

JerryBurks Re: Big Bamboo - New Machine... 12-17-2014, 06:55 AM

JerryBurks Re: Big Bamboo - New Machine... 01-03-2015, 02:19 AM

pippin88 Re: Big Bamboo - New Machine... 12-17-2014, 09:42 AM

JerryBurks Re: Big Bamboo - New Machine... 12-18-2014, 06:55 PM

nlancaster Re: Big Bamboo - New Machine... 12-18-2014, 07:44 PM

pippin88 Re: Big Bamboo - New Machine... 01-03-2015, 05:32 AM

nlancaster Re: Big Bamboo - New Machine... 01-03-2015, 06:25 AM

JerryBurks Re: Big Bamboo - New Machine... 01-07-2015, 05:40 AM

nlancaster Re: Big Bamboo - New Machine... 01-04-2015, 02:51 AM

cdrd03 Re: Big Bamboo - New Machine... 01-04-2015, 03:55 AM

alan_3301 Re: Big Bamboo - New Machine... 01-04-2015, 03:11 PM

JerryBurks Re: Big Bamboo - New Machine... 01-04-2015, 09:32 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-05-2015, 07:44 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-05-2015, 11:38 PM

JerryBurks Re: Big Bamboo - New Machine... 01-06-2015, 01:21 AM

alan_3301 Re: Big Bamboo - New Machine... 01-06-2015, 12:18 AM

Wackamazoo Re: Big Bamboo - New Machine... 01-06-2015, 03:43 AM

JerryBurks Re: Big Bamboo - New Machine... 01-06-2015, 04:42 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-07-2015, 05:54 AM

JerryBurks Re: Big Bamboo - New Machine... 01-07-2015, 06:19 AM

Wackamazoo Re: Big Bamboo - New Machine... 01-07-2015, 06:48 AM

JerryBurks Re: Big Bamboo - New Machine... 01-07-2015, 05:05 PM

ecurb5 Re: Big Bamboo - New Machine... 01-13-2015, 11:15 PM

pippin88 Re: Big Bamboo - New Machine... 01-09-2015, 12:50 AM

JerryBurks Re: Big Bamboo - New Machine... 01-09-2015, 03:11 AM

pippin88 Re: Big Bamboo - New Machine... 01-09-2015, 03:16 AM

Wackamazoo Re: Big Bamboo - New Machine... 01-09-2015, 06:12 AM

JerryBurks Re: Big Bamboo - New Machine... 01-09-2015, 04:49 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-09-2015, 06:38 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-11-2015, 04:11 AM

MadeInTheShed Re: Big Bamboo - New Machine... 01-11-2015, 08:34 AM

pippin88 Re: Big Bamboo - New Machine... 01-13-2015, 01:45 PM

alan_3301 Re: Big Bamboo - New Machine... 01-13-2015, 06:01 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-13-2015, 11:13 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-13-2015, 09:31 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-13-2015, 11:15 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-13-2015, 11:16 PM

JerryBurks Re: Big Bamboo - New Machine... 01-14-2015, 06:39 AM

nlancaster Re: Big Bamboo - New Machine... 01-15-2015, 01:45 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 03:08 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 10:13 PM

Wackamazoo Re: Big Bamboo - New Machine... 01-15-2015, 02:29 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 03:11 AM

alan_3301 Re: Big Bamboo - New Machine... 01-15-2015, 03:18 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 05:01 AM

alan_3301 Re: Big Bamboo - New Machine... 01-15-2015, 03:28 AM

alan_3301 Re: Big Bamboo - New Machine... 01-15-2015, 03:38 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 04:57 AM

Wackamazoo Re: Big Bamboo - New Machine... 01-15-2015, 05:07 AM

MadeInTheShed Re: Big Bamboo - New Machine... 01-15-2015, 11:13 AM

JerryBurks Re: Big Bamboo - New Machine... 01-15-2015, 05:02 PM

nlancaster Re: Big Bamboo - New Machine... 01-15-2015, 11:29 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-17-2015, 11:32 AM

MadeInTheShed Re: Big Bamboo - New Machine... 01-18-2015, 10:52 AM

JerryBurks Re: Big Bamboo - New Machine... 01-19-2015, 01:59 AM

JerryBurks Re: Big Bamboo - New Machine... 01-26-2015, 04:43 PM

MadeInTheShed Re: Big Bamboo - New Machine... 01-27-2015, 01:39 AM

JerryBurks Re: Big Bamboo - New Machine... 03-09-2015, 03:28 PM

pippin88 Re: Big Bamboo - New Machine... 01-18-2015, 01:19 PM

JerryBurks Re: Big Bamboo - New Machine... 01-19-2015, 02:01 AM

JerryBurks Re: Big Bamboo - New Machine... 02-06-2015, 03:50 AM

alan_3301 Re: Big Bamboo - New Machine... 01-18-2015, 01:30 PM

pippin88 Re: Big Bamboo - New Machine... 01-18-2015, 01:41 PM

JerryBurks Re: Big Bamboo - New Machine... 01-19-2015, 02:10 AM

Wackamazoo Re: Big Bamboo - New Machine... 01-18-2015, 08:54 PM

JerryBurks Re: Big Bamboo - New Machine... 01-19-2015, 02:15 AM

alan_3301 Re: Big Bamboo - New Machine... 01-25-2015, 11:27 PM

MadeInTheShed Re: Big Bamboo - New Machine... 02-04-2015, 01:14 PM

alan_3301 Re: Big Bamboo - New Machine... 02-04-2015, 04:06 PM

JerryBurks Re: Big Bamboo - New Machine... 04-12-2015, 05:14 AM

JerryBurks Re: Big Bamboo - New Machine... 04-12-2015, 05:12 AM

louieatienza Nice!!! Now to make a wooden... 04-12-2015, 06:05 PM

JerryBurks Re: Big Bamboo - New Machine... 04-12-2015, 06:19 PM

More replies below current depth...

JerryBurks Re: Big Bamboo - New Machine... 02-20-2016, 09:25 PM

More replies below current depth...

pippin88 Re: Big Bamboo - New Machine... 01-26-2015, 11:58 AM

alan_3301 Re: Big Bamboo - New Machine... 01-26-2015, 12:09 PM

MadeInTheShed Re: Big Bamboo - New Machine... 02-04-2015, 01:02 PM

JerryBurks Re: Big Bamboo - New Machine... 02-04-2015, 06:40 PM

JerryBurks Re: Big Bamboo - New Machine... 03-31-2015, 05:52 AM

MadeInTheShed Re: Big Bamboo - New Machine... 02-06-2015, 10:28 AM

pippin88 Re: Big Bamboo - New Machine... 02-10-2015, 11:42 AM

JerryBurks Re: Big Bamboo - New Machine... 02-10-2015, 04:43 PM

MadeInTheShed Re: Big Bamboo - New Machine... 02-12-2015, 04:23 AM

Devastator Re: Big Bamboo - New Machine... 04-12-2015, 05:27 PM

MadeInTheShed Re: Big Bamboo - New Machine... 02-12-2015, 10:28 AM

pippin88 Re: Big Bamboo - New Machine... 03-09-2015, 10:11 AM

pippin88 Re: Big Bamboo - New Machine... 04-12-2015, 05:38 AM

alan_3301 Re: Big Bamboo - New Machine... 04-12-2015, 11:46 AM

JerryBurks Re: Big Bamboo - New Machine... 02-28-2016, 02:50 AM

Devastator Re: Big Bamboo - New Machine... 02-28-2016, 04:37 AM

mountaindew Re: Big Bamboo - New Machine... 04-12-2015, 01:31 PM

cyclestart Re: Big Bamboo - New Machine... 04-12-2015, 05:52 PM

JerryBurks Re: Big Bamboo - New Machine... 04-12-2015, 06:26 PM

pippin88 Re: Big Bamboo - New Machine... 11-17-2015, 05:22 AM

JerryBurks Re: Big Bamboo - New Machine... 11-17-2015, 06:24 AM

pippin88 Re: Big Bamboo - New Machine... 02-28-2016, 05:43 AM

JerryBurks Re: Big Bamboo - New Machine... 02-28-2016, 04:56 PM

JerryBurks Re: Big Bamboo - New Machine... 06-04-2016, 03:24 AM

JerryBurks Re: Big Bamboo - New Machine... 06-04-2016, 03:22 AM

mountaindew Re: Big Bamboo - New Machine... 02-28-2016, 06:03 PM

eloid Re: Big Bamboo - New Machine... 03-03-2016, 09:36 AM

JerryBurks Re: Big Bamboo - New Machine... 01-25-2017, 06:15 AM

JerryBurks Re: Big Bamboo - New Machine... 06-11-2017, 10:39 PM

JerryBurks Re: Big Bamboo - New Machine... 10-11-2018, 10:44 PM

MadAubrey Re: Big Bamboo - New Machine... 09-23-2016, 06:58 PM

JerryBurks Re: Big Bamboo - New Machine... 09-25-2016, 05:52 AM

JerryBurks Re: Big Bamboo - New Machine... 03-03-2017, 04:30 AM

JerryBurks Re: Big Bamboo - New Machine... 05-06-2021, 08:10 PM

fretman_2 Re: Big Bamboo - New Machine... 01-25-2017, 02:47 PM

JerryBurks Re: Big Bamboo - New Machine... 02-19-2018, 10:30 PM

Mauser Re: Big Bamboo - New Machine... 01-26-2017, 06:08 AM

jfong Re: Big Bamboo - New Machine... 01-26-2017, 07:53 AM

1Jumper10 Re: Big Bamboo - New Machine... 01-30-2017, 01:25 AM

JerryBurks Re: Big Bamboo - New Machine... 01-30-2017, 09:45 PM

mountaindew Re: Big Bamboo - New Machine... 02-21-2018, 03:12 PM

JerryBurks Re: Big Bamboo - New Machine... 03-26-2024, 01:36 AM

JerryBurks Re: Big Bamboo - New Machine... 04-08-2024, 04:53 PM

JerryBurks Re: Big Bamboo - New Machine... 05-06-2021, 08:01 PM

JerryBurks Re: Big Bamboo - New Machine... 05-06-2021, 07:58 PM

fretman_2 Re: Big Bamboo - New Machine... 02-20-2018, 03:17 PM

1Jumper10 Re: Big Bamboo - New Machine... 02-20-2018, 07:28 PM

JerryBurks Re: Big Bamboo - New Machine... 02-21-2018, 10:33 PM

JerryBurks Re: Big Bamboo - New Machine... 03-08-2022, 03:45 AM

Mr-MaW Re: Big Bamboo - New Machine... 06-12-2023, 11:29 AM

pippin88 Re: Big Bamboo - New Machine... 02-21-2018, 10:49 AM

fretman_2 Re: Big Bamboo - New Machine... 08-21-2018, 02:34 PM

pippin88 Re: Big Bamboo - New Machine... 05-24-2021, 10:00 AM

1Jumper10 Re: Big Bamboo - New Machine... 08-24-2021, 04:09 PM

peteeng Re: Big Bamboo - New Machine... 04-08-2024, 10:45 PM

Biggs427 Re: Big Bamboo - New Machine... 04-23-2024, 05:42 PM

Previous Post

Next Post

10-14-2011, 12:18 AM #11
ger21

View Profile

View Forum Posts

Community Moderator
Join Date

Mar 2003

Posts

35494
You're not trying to run those huge motors from a G250, are you?

Gerry

UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html

Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html

(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Reply With Quote

Quick Navigation CNC Wood Router Project Log Top

« Previous Thread | Next Thread »

Similar Threads

7 x 10 project started

By blades in forum Mini Lathe

Replies: 125
Last Post: 01-25-2017, 05:27 AM
CNC Project Started

By NotSqueaky in forum CNC Wood Router Project Log

Replies: 8
Last Post: 09-10-2014, 12:41 AM
New Project Started

By Rumblebelly5 in forum Joes CNC Model 2006

Replies: 1
Last Post: 09-15-2012, 10:50 PM
My 4x8 project has started

By MetalHead6263 in forum Plasma, EDM / Other similar machine Project Log

Replies: 37
Last Post: 01-31-2012, 07:30 AM
Started new project

By rustamd in forum DIY CNC Router Table Machines

Replies: 55
Last Post: 05-31-2009, 04:12 AM

Tags for this Thread

another, mos, not, sub

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is On

All times are GMT +1. The time now is 06:28 AM.

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.