603,978 active members*

1,682 visitors online*

Register for free

Login

IndustryArena Forum > WoodWorking Machines > DIY CNC Router Table Machines > Momus Design CNC plans > Jonathan's Build Thread

Thread: Jonathan's Build Thread

Results 1 to 20 of 155

Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

GTFreeFlyer Jonathan's Build Thread 08-09-2011, 06:44 AM

groswald Jonathan, Most of the... 08-09-2011, 02:16 PM

GTFreeFlyer Yes, I thought about that too... 08-09-2011, 02:50 PM

momus_cnc Yeah, my ideal situation... 08-10-2011, 12:53 PM

groswald I mis-spoke when I used the... 08-10-2011, 05:17 PM

GTFreeFlyer More info on the metals from... 08-10-2011, 06:08 PM

ldanut I got mine from... 08-10-2011, 07:58 PM

GTFreeFlyer Filing edges, inking,... 08-11-2011, 05:44 AM

groswald Jonathan, If by "filing... 08-11-2011, 02:44 PM

antisubae You can square up the edges... 08-11-2011, 10:56 PM

GTFreeFlyer I saw a few people mention in... 08-19-2011, 07:21 AM

kemper45 Gecko System 08-19-2011, 10:12 PM

TeslaFreakshow I did the same thing part 16... 10-04-2011, 06:18 AM

momus_cnc I agree, and I need to clean... 08-20-2011, 02:00 AM

TeslaFreakshow I was going to mention this... 10-04-2011, 06:16 AM

GTFreeFlyer Alright, back to work. I've... 09-27-2011, 05:54 AM

revwarguy I'm pretty sure I'll pick up... 10-01-2011, 10:03 PM

SpeedyDad If you get a Colt, check the... 10-01-2011, 10:44 PM

GTFreeFlyer Ah yes, the quad copters. ... 10-02-2011, 03:38 AM

GTFreeFlyer So is the Ridgid 2401 the... 10-02-2011, 03:34 AM

SpeedyDad I think most are using the... 10-02-2011, 04:56 AM

TeslaFreakshow My mounts didn't fit very... 10-04-2011, 06:23 AM

GTFreeFlyer SuperPID has 15% off for the... 10-19-2011, 05:41 AM

bjesson Hi Guys, havn't been here... 10-19-2011, 09:57 PM

GTFreeFlyer Bj, thanks for the quote and... 10-21-2011, 12:25 AM

GTFreeFlyer Is anyone running Mach 3 off... 10-21-2011, 12:28 AM

Michael In Cali If you left yourself extra... 10-21-2011, 06:04 AM

fastpcuser I currently have that, but... 10-21-2011, 02:09 AM

GTFreeFlyer Nice. You mean something... 10-21-2011, 11:16 PM

acondit I have a Intel D525MW mb... 10-22-2011, 12:29 AM

Michael In Cali GT, yes, like that, but you... 10-22-2011, 03:13 AM

acondit The Intel 510 is 1.6gHz and... 10-22-2011, 05:11 AM

Michael In Cali Thanks for that. I was... 10-22-2011, 02:53 PM

GTFreeFlyer Clamps are done. I'm glad... 11-07-2011, 05:44 AM

Bob Adams I got my rails from Online... 11-07-2011, 07:33 PM

GTFreeFlyer I guess I haven't really... 11-08-2011, 03:35 AM

Bob Adams Hope yours comes out OK. I'm... 11-08-2011, 04:51 PM

cgodwin I got my rails from Speedy... 11-09-2011, 06:18 PM

Bob Adams I would like to know what... 11-09-2011, 07:24 PM

cgodwin Since my angles were... 11-09-2011, 08:28 PM

antisubae Anecdotally...all the steel... 11-10-2011, 02:48 AM

GTFreeFlyer More progress. Still having... 11-10-2011, 07:27 AM

GTFreeFlyer Parts are rolling in. I... 11-28-2011, 01:08 AM

GTFreeFlyer Back in business 07-02-2012, 06:33 AM

GTFreeFlyer The base is coming along! ... 07-09-2012, 04:59 AM

GTFreeFlyer I have the G540 and plan on... 07-11-2012, 12:00 AM

GTFreeFlyer Looking for suggestions and... 07-11-2012, 12:03 AM

GTFreeFlyer I'm thinking of building a... 07-11-2012, 12:05 AM

GTFreeFlyer Forget this idea. I've... 07-16-2012, 09:06 PM

GTFreeFlyer I had a little bit of... 07-16-2012, 09:09 PM

OCNC I had the same problem but... 07-17-2012, 03:08 AM

bjesson I had the same issue, just... 07-31-2012, 06:03 AM

GTFreeFlyer Spent a little time on CAD... 07-19-2012, 03:44 AM

GTFreeFlyer Back part of the cover... 07-21-2012, 12:24 AM

GTFreeFlyer Pic 1: Temporary clamped... 07-30-2012, 02:59 PM

GTFreeFlyer Are you using the planned... 07-31-2012, 06:54 AM

groswald Rust? What's rust? Oh give... 07-31-2012, 02:31 PM

gera229 Is this machine direct drive?... 08-03-2012, 05:12 AM

momus_cnc Yes, the Momus machine is... 08-03-2012, 04:36 PM

momus_cnc I should also add that with a... 08-03-2012, 04:45 PM

gera229 For me resolution wouldn't be... 08-03-2012, 08:44 PM

momus_cnc Yep, I'm the designer. The... 08-03-2012, 09:39 PM

GTFreeFlyer I'm looking into buying the... 08-04-2012, 06:26 AM

GTFreeFlyer Well I finally got my... 08-09-2012, 04:00 AM

GTFreeFlyer Finally started playing... 08-19-2012, 05:26 AM

GTFreeFlyer More progress on the... 08-25-2012, 09:21 AM

GTFreeFlyer Plugged it in last night and... 08-28-2012, 02:44 PM

GTFreeFlyer Was able to move the stepper... 08-30-2012, 03:39 AM

GTFreeFlyer First motion! YouTube -... 08-31-2012, 09:10 AM

momus_cnc Looking great! Can't wait to... 08-31-2012, 05:55 PM

Bob Adams Great Job!! The wooden left... 08-31-2012, 09:45 PM

GTFreeFlyer What specifically on the left... 08-31-2012, 09:50 PM

GTFreeFlyer First chips 09-05-2012, 05:42 AM

GTFreeFlyer It has become evident that... 09-07-2012, 11:19 PM

GTFreeFlyer Grrrrrr. Rapid to the left... 09-09-2012, 01:09 AM

momus_cnc Oh no! The Version 1.0... 09-09-2012, 03:22 AM

OCNC Charlie Welkie probably did a... 09-09-2012, 03:35 AM

GTFreeFlyer Thanks guys. I had used the... 09-09-2012, 07:52 AM

GTFreeFlyer Machine is apart. I'm going... 09-10-2012, 07:03 AM

GTFreeFlyer Here's a picture of what the... 09-10-2012, 04:36 PM

GTFreeFlyer Having lots of fun with the... 09-24-2012, 04:01 AM

Bob Adams You did a great job on your... 09-24-2012, 04:32 PM

GTFreeFlyer A picture of the painted... 09-24-2012, 05:22 PM

skyguynca Nice job 09-24-2012, 09:36 PM

momus_cnc Looks like Bob A. beat me to... 09-25-2012, 03:33 AM

GTFreeFlyer Doh! Not sure why this... 09-25-2012, 06:00 AM

GTFreeFlyer On a more positive note, the... 09-25-2012, 06:02 AM

GTFreeFlyer I looked at my broken bit... 09-25-2012, 04:35 PM

GTFreeFlyer Here is one of three switch... 09-27-2012, 04:43 AM

GTFreeFlyer Here's a video of me cutting... 09-27-2012, 05:12 AM

GTFreeFlyer Making more switch panels. ... 09-29-2012, 12:24 AM

GTFreeFlyer All done with the panels. 09-29-2012, 12:26 AM

GTFreeFlyer A closer look... 09-29-2012, 12:27 AM

GTFreeFlyer Today I played around with... 09-30-2012, 06:08 AM

cgodwin Can you post a video of those... 10-01-2012, 05:27 PM

GTFreeFlyer I'll grab some video for you... 10-01-2012, 09:38 PM

GTFreeFlyer Alright here is the video. ... 10-02-2012, 05:21 AM

GTFreeFlyer Here is the front AC power... 10-02-2012, 05:39 AM

Jkountz Can I ask where you sourced... 12-17-2013, 10:32 PM

GTFreeFlyer Found in the local... 12-18-2013, 12:11 AM

jim_r53 This is what I plan on using... 12-18-2013, 06:29 AM

GTFreeFlyer That looks almost exactly... 12-18-2013, 07:37 AM

GTFreeFlyer I was trying to work out some... 10-02-2012, 04:19 PM

GTFreeFlyer More videos... Cutting... 10-04-2012, 11:01 PM

GTFreeFlyer . 10-04-2012, 11:02 PM

GTFreeFlyer I've been away from this... 11-26-2013, 07:56 PM

Mac.CNC Hey, glad' you're back, it's... 11-27-2013, 06:29 AM

GTFreeFlyer Quick update 12-05-2013, 06:56 PM

GTFreeFlyer Still on track... Machine... 12-10-2013, 04:01 PM

GTFreeFlyer I've been working every... 12-16-2013, 06:59 AM

Mac.CNC I'm definitely following your... 12-17-2013, 06:42 AM

GTFreeFlyer You have my head spinning... 12-17-2013, 03:46 PM

Mac.CNC That totally depends on your... 12-17-2013, 07:38 PM

GTFreeFlyer I'll try it out. When my... 12-18-2013, 12:08 AM

jim_r53 I am following as a... 12-16-2013, 04:21 PM

GTFreeFlyer Just thought of something... ... 12-18-2013, 07:55 AM

GTFreeFlyer Movement! I'm back up and... 12-20-2013, 09:36 PM

GTFreeFlyer Forget my question above. ... 12-21-2013, 01:51 AM

GTFreeFlyer While the machine is down, it... 12-23-2013, 07:59 AM

GTFreeFlyer So I pulled out the G540,... 12-23-2013, 07:53 AM

GTFreeFlyer So I just happen to live... 12-23-2013, 11:06 PM

GTFreeFlyer I'm back up and running! I... 12-24-2013, 06:51 AM

GTFreeFlyer Quick update... Just about... 12-29-2013, 01:22 AM

Levictus Subbed, just read through the... 12-31-2013, 05:26 AM

GTFreeFlyer You will it enjoy it. Very... 12-31-2013, 05:21 PM

GTFreeFlyer New video! Momus CNC... 12-31-2013, 05:34 PM

ger21 What you create that g-code... 12-31-2013, 05:51 PM

GTFreeFlyer Hi Gerry, I wrote out the... 12-31-2013, 07:36 PM

ger21 Do you mean Mach3 wizards? I... 12-31-2013, 08:29 PM

GTFreeFlyer Gerry, I checked out... 01-07-2014, 04:40 AM

GTFreeFlyer Thanks for the info. Yes, I... 01-01-2014, 01:29 AM

ger21 Pages 5-6 and 8 in the manual... 01-01-2014, 01:39 AM

GTFreeFlyer Tramming complete. I made a... 01-08-2014, 07:49 AM

Mac.CNC I do think that you will... 01-09-2014, 05:15 AM

GTFreeFlyer I completely agree that I may... 01-09-2014, 08:34 AM

GTFreeFlyer Engraving a line in x and y... 01-17-2014, 07:42 AM

GTFreeFlyer T-track came in last week and... 01-17-2014, 07:44 AM

Mac.CNC You're almost there. Looks... 01-18-2014, 05:10 AM

Levictus Great looking t-track. What... 01-17-2014, 04:57 PM

GTFreeFlyer It's the universal t-track... 01-17-2014, 05:18 PM

GTFreeFlyer I'm testing out a new Mach3... 01-18-2014, 05:29 PM

ger21 This link might work better.... 01-18-2014, 05:59 PM

GTFreeFlyer Thanks. Wrong link I posted. 01-18-2014, 06:24 PM

Levictus So what acme screw are you... 01-18-2014, 07:49 PM

GTFreeFlyer 1 - Slowest speed, maximum... 01-19-2014, 04:13 AM

GTFreeFlyer Re: Jonathan's Build Thread 09-26-2014, 09:53 PM

travis_cnc Re: Jonathan's Build Thread 11-14-2014, 05:38 AM

GTFreeFlyer Re: Jonathan's Build Thread 11-14-2014, 07:54 AM

GTFreeFlyer Re: Jonathan's Build Thread 10-23-2018, 08:44 PM

Mac.CNC Re: Jonathan's Build Thread 10-24-2018, 03:17 AM

GTFreeFlyer Re: Jonathan's Build Thread 10-26-2018, 06:00 AM

GTFreeFlyer Re: Jonathan's Build Thread 10-31-2018, 09:51 PM

GTFreeFlyer Re: Jonathan's Build Thread 01-12-2023, 06:14 AM

Jkountz I was just thinking about... 01-12-2023, 01:06 PM

GTFreeFlyer Re: Jonathan's Build Thread 01-23-2023, 01:22 AM

Previous Post

Next Post

11-07-2011, 07:33 PM #11
Bob Adams

View Profile

View Forum Posts

Visit Homepage

Registered
Join Date

Jul 2003

Posts

281
I got my rails from Online Metals and the stock was bowed. How was yours and where did you buy it?

Reply With Quote

Quick Navigation Momus Design CNC plans Top

« Previous Thread | Next Thread »

Similar Threads

just another 45 build thread

By CS900 in forum Benchtop Machines

Replies: 68
Last Post: 03-28-2016, 02:47 PM
Build Thread - 80/20 5X10 Woodworking CNC Build

By jsantos in forum CNC Wood Router Project Log

Replies: 70
Last Post: 08-20-2014, 03:15 AM
Hi From Jonathan Fortin, Next Engineering inc.

By next eng. in forum Community Club House

Replies: 0
Last Post: 05-18-2013, 11:39 AM
Build Thread 1

By groswald in forum Momus Design CNC plans

Replies: 126
Last Post: 11-11-2011, 07:09 PM
Mint's Build Aluminum/Steel Build thread.

By FreshMint in forum Maintenance DIY Discussion

Replies: 0
Last Post: 10-31-2011, 04:18 AM

Tags for this Thread

almost, already, als, down, keep, mos, saw, since, took

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

All times are GMT +1. The time now is 10:14 PM.

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.