How can I add a corner radius cutter to my tool library? Not a ball end mill, but an outside corner radius cutter.
How can I add a corner radius cutter to my tool library? Not a ball end mill, but an outside corner radius cutter.
Check out this thread, it will show you how.
Mike
http://www.cnczone.com/forums/bobcad...or_header.html
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28