Hey guys,
I have been silently looking over many of the amazing builds on the website and have gathered a wealth of knowledge thanks to you guys!
A bit about myself, I am 16 years old and for my senior project for high school, I plan on building a small CNC router.
The CNC router will be used for; PCB's, wood work, plastics and (hopefully) Aluminium.
The main base frame is made from 40x40 and 40x80 extrusion and the Z axis is made of 12mm aluminium. The side plate are made from 12mm steel plate.
The linear rails that are going to be used are the 16mm supported rail type that you can get from ebay.
The proposed working area is 300x200mm with 110mm z.
Attached is my design so far and was just looking for you guys opinions and improvements!
Thanks
Praneet